Texas Speed & Performance Stage 3 Low Lift 216/220 Hydraulic Roller Truck Camshaft (00-14 V8 Tahoe)Find parts that fit my vehicle

TSP Stage 3 Low Lift Truck Cam Specs: 216/220 .550/.550 112 LSAThis cam gained 53.4 HP and 22.0 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine! This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! This is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! Engines best suited for: 4.8, 5.3, 5.7, 6.0Desired Compression ratio for cam: 9.5:1+Recommended Springs Required: GM LS6 Single Beehive SpringsAftermarket Stall Converter Required: No, but a 3000+ stall converter will give maximum performanceUpgraded Rear Gear Required: NoOperating RPM Range: 1200-6400Power Increase: Gains of 53 Horsepower and 22 Ft. Pounds of Torque Drivability: Great driveability and can be daily driven with no issues!hop Level Mild ChopValve Spring Requirement Upgraded valve springs required

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov