Review & Install Video
The MBRP Installer Series three-inch cat-back exhaust is available for any 2015 or newer five liter F-150 owner who's looking to pick up a budget-friendly single side exit exhaust that offers a pretty decent loud and aggressive exhaust note without going too overboard. The Installer is the most affordable of the three different series of cat-backs that MBRP offers, all of which differ based on materials. This option is made of aluminized steel, which of course isn't the highest quality as other options, but it allows you to pick up a sound upgrade at an affordable $400 price range, with a single side exit design, as I already mentioned. The installation for something like this is pretty simple, although it may require you to cut the extension pipe here provided in the kit depending on your cab size and bed length, which Ill talk more about later on. With that said, still giving it one out of three wrenches on our difficulty meter. The first thing I wanna tackle here with the Installer option is obviously gonna be the sound. As you just heard from our sound clips, the single side exit cat-back here is gonna upgrade your Coyote motor's tone to sound deeper, throatier, and louder than stock. Even though it sounds more aggressive with a louder tone, it's definitely not too overbearing, like say a Borla ATAK. Outside the truck at idle, it sounds pretty quiet, but once you start getting up on it and the sound picks up, it's very noticeable. Inside the truck, the sound stays pretty low, although on the highway you can start to get just a small amount of drone. In my opinion, it's not really a bad thing. Overall, it gets a three out of five on our loudness meter, and in my personal opinion, this is one of the better sounding options along with something like [inaudible], that really gives your Coyote motor that muscular sound it deserves. Obviously sound is directly attributed to the materials and construction of the system. This one is manufactured out of a three-inch heavy-duty aluminized steel tubing and a natural finish. It's got a bullet-style muffler over here which gives us the louder and more aggressive tone, and that'll connect with three and a half inch polished stainless steel tips at the rear end, which isn't really the largest, but it definitely gives you a more attractive appearance, especially bearing the MBRP name in the materials. As I mentioned in the beginning, the only thing making this one different from the other options in the MBRP series is the materials. This one is the aluminized steel, which is the most budget-friendly exhaust material available, coming in at just over the $400 mark. If you're located in wintery weather areas, seeing a lotta road salt, I'd probably recommend considering the next MBRP option, simply because it'll hold up a lot better in the long run against corrosion, those would be the XP Series with 409 stainless at about 550, and the Pro Series 304 being the top dog, highest quality, at about 700 bucks. This one here, however is great for guys looking to stay on a tighter budget but still want the same sound, as they all do produce the same sound. Shifting gears over to the installation, single side exits, lucky for you, are one of the most simplistic applications since there isn't too much to work with. This kit even includs the extension pipe for those with extended cabs or beds who needs a bit more tubing to make it out the back. If you do need it, you might have to make a single cut to that pipe, and MBRP lays out exactly how to measure that out in their instruction manual provided in the kit. Remember to measure twice and cut once. You'll need a ratchet and socket set in addition to the cutting tool of your choice like a sawzall, in order to get the old cat-back off and the new stuff on. This really shouldn't take any longer than about two hours from start to finish, even with the single cut, I'm still giving it one out of three wrenches on our difficulty meter. Well just to wrap this one up, if you're the owner of a 2011 to 2014 five liter F-150, you might wanna check out the MBRP Installer Series three-inch single side exit cat-back exhaust, which you can find right here at americantrucks.com.
Hear true performance notes coming out of your truck when this MBRP gas exhaust system is installed properly. The kit is a single pipe setup with wide 3" stainless steel that delivers a booming deep vibrato that you'll feel deep in your bones when you drive. It's the sound of power, and it's positively addicting. You'll love the way you truck sounds, and you'll swear that you're in a new vehicle altogether.
Serious Performance Enhancements.
Take your driving more seriously and outfit your pickup truck with this very capable exhaust system from MBRP automotive. The kit features 3" pipes that are designed to streamline the exhaust evacuation process. Your truck's engine will run more efficiently thanks to the careful design of the pipe system with minimal bends and wide pathways from start to finish. Get the most out of your ride by adding this exhaust to it and enjoy the improved power that you get as well.
Aluminum is well-known for standing up to weather and corrosion exceptionally well. It corrodes very slowly and won't rust away like steel does. That's why the pipes and muffler are made with steel that features a thick coating of aluminum. they enjoy top-quality corrosion protection while offering the strength of steel as well.
This single side cat-back exhaust kit installs in just an hour or two with simple tools. There is no welding or cutting to worry about and the installer doesn't even need to put in hangers. The parts bolt onto the OEM hangers and the installation is finished.
This exhaust kit fits 2011 to 2014 Ford F-150 pickup trucks. It's a single side exit unit and works on most of the F-150 pickups in the supported year range without issue.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- What's in the Box
- (1) Front Pipe
- (1) Extension Pipe
- (1) Muffler
- (1) Over Axle Pipe
- (1) Tailpipe
- (1) 3" Hanger Clamp
- (3) 3" Clamps
- (2) 3/8" x 2 1/2" Hex Bolts
- (4) 3/8" Flat Washers
- (2) 3/8" Lock Washers
- (2) 3/8" Hex Nut
- (1) Exhaust Tip
- Installation Info
Installation Time: (approx) 2 Hours
Difficulty Level:Light to Moderate mechanical skill required.
- Tech Specs
- Will it fit my F-150?
Designed for Regular Cabs with a 8 ft. Bed, SuperCabs with a 5.5 ft. & SuperCrews with a 5.5 ft. or 6.5 ft. Bed.