K&N Tahoe Series 63 AirCharger Cold Air Intake 63-3082 (15-20 6.2L Tahoe)

Product Information

Features, Description, Reviews, Q&A, Specs & Installation

Features & Specs

Guaranteed Increase In Horsepower & Torque Through Less Restrictive Airflow Path
Dyno Testing Performed Using Wheel-Based Dynamometers With Included Reports
Enhanced Engine Sound With Noticeable Growl On Acceleration
Improved Acceleration And Uphill Performance When Towing
Provision Of Premium Engine Protection Without Voiding Factory Warranty
High-Flow Reusable Cotton Gauze Air Filter Treated With Red Filter Oil
Filter Requires Cleaning Every 100,000 Miles Under Normal Highway Conditions
Detailed Step-By-Step Installation Instructions Included With All Necessary Parts
Proudly Made In The USA With Reliable Customer Support
Estimated Horsepower Gain Of 10.68 HP At 5341 RPM
Estimated Torque Gain Of 10.9 Lb-ft
Clamps Made Of Stainless Steel Included
Clamp Style Is Regular
One Coupler Included
Replacement Filter Part Number RU-1041
Alternate Replacement Filter RF-1041 Also Available
Intake Pipe Constructed Of High-Density Cross-Linked Polyethylene
Intake Pipe Finish Is Black
Street Legal In All US States Except California
Product Weight Is 13.4 Lb (6.1 Kg)
Mounting Hardware Included For Installation
Comes With No-Hassle Lifetime Limited Warranty
Fits 2015-2020 6.2L Tahoe Models

Brand

K&N

Cold Air Intake Type

Cold Air Intake

Tuning Requirements

No Tune Required

Cold Air Intake Tube Material

Plastic

Cold Air Intake Filter Type

Oiled

Description

Performance Enhancement. The K&N Series 63 AirCharger Cold Air Intake is engineered to increase horsepower and torque by optimizing airflow to the engine. It replaces the factory air box with a high-flow system that improves throttle response and overall engine efficiency, enhancing driving performance for both daily use and towing.

Construction and Appearance. This intake features a high-density cross-linked polyethylene tube finished in black for durability and corrosion resistance. The air filter uses four layers of pleated cotton gauze treated with red filter oil to efficiently trap dirt and dust while maintaining airflow. The system includes stainless steel clamps to ensure secure connections.

Installation. Installation is straightforward and typically completed within 60 minutes using basic hand tools. No drilling or modifications to the vehicle are necessary, providing a clean and hassle-free upgrade.

Warranty and Application. The system is backed by a No-Hassle Lifetime Limited Warranty, providing long-term protection for the life of the vehicle. It is specifically designed to fit 2015-2020 6.2L Tahoe models.

Application. Specifically designed to fit 2015-2020 6.2L Tahoe models.

K&N 63-3082

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Installation & What's in the Box

What's in the Box

(1) HOSE CLAMP #56 (A) - Part #08620
(1) HOSE;4"ID TO 3.5"ID X 3"L (B) - Part #08497
(4) HOSE CLAMP #64 STAINLESS (C) - Part #08645
(2) HOSE;5/8"ID X 14"L (D) - Part #084083
(2) VENT;STRT,5/8BARBED1/4 (E) - Part #08911-2
(1) INTAKE TUBE;(IZ) (F) - Part #087268A
(1) WASHER; M6 SPLIT LOCK ZINC (M) - Part #1-3025
(1) EDGE TRIM; 44"L (N) - Part #102486A
(2) HEAT SHIELD (O) - Part #07733
(4) ADAPTER;#454 (P) - Part #08269
(4) HOSE CLAMP #104 (Q) - Part #07730
(2) AIR FILTER (R) - Part #08418
(1) GASKET;3/16â€PORON (G)
(1) ADAPTOR;MAF SENSOR (H)
(1) BOLT;M4-.7X8MM (I)
(1) WASHER;6MM FLAT (J)
(1) BOLT;M6X1X16MM (K)
(1) HOSE;4"IDX3"LHUMP (L)
(1) HOSE; 4" ID x 3" L hump hose (08418 for 6.2L / 08497 for 5.3L coupling hose mentioned in instructions)