(approx) 1 Hour
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note. The K&N Cold Air Intake is not designed for vehicles equipped with a Body Lift.
Fitment: 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 10, 2020
K N System
Easy instal great product. Directions were right on. Install took bout an hour. I do recommend this product!Helpful (0)
January 26, 2020
Nice sound and gains
I've had and installed kandn intakes on several Honda's, Acuras, and now my Silverado. Installation was easy with basic tools...I did end up cracking one of the plastic vent threads, but I went to Ace hardware and found a decent replacement to finish the install. Adds a nice low rpm throaty sound in the engine area, and I see the hp gains especially when entering the on ramp for the highway or turnpike.Helpful (0)
November 22, 2019
I’ll never do business with this site again
Was about to purchase this with a supercharger and some other products for my truck but I see you guys won’t post my honest review of the $1200 exhaust I purchased. Congratulations. I’ll never spend another dime on this website because you don’t want buyers to really know any negatives about your products. Pretty disgusting. Plenty of other honest websites out there. GoodbyeHelpful (5)
October 17, 2019
Really easy to install. If you have any basic mechanical knowledge you can do it without the instructions. I cant speak on the performance changes but the dyno graphs that get sent with it tell you everything you need to know. The best part is the sound difference, you can really hear the engine once its installed and its amazing!Helpful (0)
September 24, 2019
K N 63
Easy install. Video was helpful as a reference. Only thing is make sure you put the mass air flow sensor in the right way or the truck will start then stall.Helpful (2)
September 15, 2019
Simple install and works perfectly
The cold air intake is high quality and the fitment is perfect. My truck has a nice growl that it never had before. Exhaust upgrade is next on the list.Helpful (0)
August 25, 2019
Worth the purchase
The install was very straight forward, anyone with no experience can easily do it in their driveway. Horse power gains were noticeable with the classic Silverado pedal lag while also giving the engine a much deeper sound while accelerating. Mpg hasn't improved but I'm running 33s, the better sound of the engine alone is worth the money.Helpful (0)
April 14, 2019
Easy install. Third KandN AirCharger I have installed on a vehicle. Sounds great, and better performance.Helpful (0)
April 02, 2019
An honest review
I have a 2018 Silverado 5.3 and installed this intake on it. In my honest opinion, it’s not worth $300. The main reason for that is I didn’t really see any hp gains (which I know is only 12-20). Another reason is for a COLD air intake, my Edge Programmer still shows my intake temp being 130-140° while cruising on a 65°day, which I expected to take it down close to ambient temp. It looks great on the engine bay and it definitely gives you a deeper tone under hard throttle, but if you’re putting this on a stock truck, I wouldn’t recommend it if you’re lookin for cheap horsepower. I’ve checked all vacuum hoses, I’ve checked the MAF attachment to make sure there were no leaks and also the throttle body “sleeve” and clamps, everything was installed correctly. I have this same intake on a built 08 5.3 and it whistles and definitely showed improvement on air flow, but like I said on a stock vehicle I wouldn’t recommend getting an expensive CAI.Helpful (5)
January 29, 2019
Worth every $
Easy to install and worth every $. Turned my truck into a different animal.Helpful (2)
First will it void manufactures warranty, second is there a place to insert the mass flow sensor.
The K&N Series 63 Aircharger Cold Air Intake will have a location for the MAF sensor, and should have no effect on the warranty.
The filter is it dry or its oiled.
This intake has an oiled filter.
does this come with everything you need to install, or are more parts required, i.e., throttle body spacer, clamps, etc.?
This does indeed come with everything necessary for install on an otherwise stock application.
The crankcase vent fittings that thread into the intake tube broke and I cannot locate them at Any parts store. Where can i get two...one for replacing the broken one, and one as a spare?
We would suggest attempting to reach out directly to the manufacturer and you can do so here athttps://www.knfilters.com/contact.htm
Will this k n n make my check engine light come on?
As this is a no-tune required intake, it will not trigger a check engine light.
No, the K&N Series 63 Aircharger Cold Air Intake is not legal for use in California or other states adopting California emission standards. Any of our intakes that are CARB approved will list the CARB EO number on the item page.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box