Free Shipping On Orders Over $75. Details

Talk to a Silverado 1500 Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$5,000 Giveaway! 5 Chances to Win! Enter Daily >

Airaid PowerAid Throttle Body Spacer (14-22 5.3L Silverado 1500)

Item S100290
Call a Silverado Enthusiast at 1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Market Price $169.99 You Save 12% ($20.00)
Our Price

$149.99 (each)

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      The Airaid PowerAid Throttle Body Spacer is available for the 2014 or newer 5.3-liter Silverado owner who might be looking to slightly increase their plenum air volume to better their air-fuel mixture for an easy improvement in engine combustion, which basically means a more efficient engine. This is extremely easy to install and works with your factory throttle body as a direct bolt-on, so I'm giving this one out of three wrenches on our difficulty meter, which I'll detail toward the end of the video. When adding a spacer like this, you're basically increasing the speed and volume of the air coming into your plenum and manifold, which can lead to a better-performing motor. You might see small gains in fuel efficiency and maybe even a small single-digit gain in horsepower, but the most notable thing about this is definitely gonna be the air optimization. The unique Helix Bore design you see inside here will help to thrust and spin the air coming through the body to help with air-fuel improvements I mentioned a second ago. This is very unique to the Airaid spacer here, whereas some other brands use a solid inner circle, which may not be entirely as effective as this aspect. You may even notice a slight whistle coming from under the hood, which is to be expected from the helix design, letting you know it's doing its job. It was CNC machined from a high-quality billet aluminum for a durable construction and finished in red for corrosion resistance. And it comes with everything necessary to get the job done, which is essentially just a couple of bolts. Expect to be spending right around 100 bucks for this part, which is an alternative to a full-throttle body but obviously not nearly as effective as a complete throttle-body replacement. You can see, again, very small increase in throttle response with this, for much more of an affordable cost. If you're running a lot of bolt-ons, then an increased auto-body size would absolutely be more beneficial. This is typically a stock motor mod. To get this thing installed, you'll need a ratchet and a very simple socket set, and about 30 minutes or so in the driveway or garage at home. It's really just a matter of unclamping the coupler from your stock air box or aftermarket intake from your throttle body, removing the four bolts holding it to the plenum, placing the spacer and the gasket in between them and then bolting it back together again. Once you've got your coupler clamped back down, you're good to go. Wrapping this one up, if you're the owner of a '14 or newer 5.3-liter Silverado, you might wanna check out the Airaid PowerAid Throttle Body Spacer, which is available right here at

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation


      • Improves Low End Torque
      • Enhances Throttle Response
      • Aircraft Quality Billet 6061-T6 Aluminum
      • Helix-Bore Design
      • No Drilling or Cutting Required
      • Fits 2014-2022 5.3L Chevrolet Silverado 1500 Models


      Built to Last. Get the most out of your ride with the Airaid PowerAid Throttle Body Spacer. Designed to enhance your off-idle to mid-range power and efficiency, this throttle body spacer allows your vehicle to finally reach its potential. Every Airaid PowerAid Throttle Body Spacer is made from Aircraft Quality Billet 6061-T6 Aluminum to ensure a long-life with consistent performance for your ride.

      Innovative Design. The Airaid PowerAid Throttle Body Spacer uses a unique, Helix-Bore design which creates and utilizes a spinning motion for the incoming air. As that air passes through your Silverado's throttle body, a helical effect organizes these air molecules to maintain an extremely high velocity. Both the air molecule organization and maximized velocity help create a perfect, atomized mixture of air and fuel which makes its way to the combustion chamber for peak-power.

      Made for Your Convenience. The Airaid PowerAid Throttle Body Spacer is designed for your convenience, including all of the necessary hardware, gaskets and precision brackets needed to comply with your car's factory components. This means you get to avoid the normal hassles like drilling or cutting during installation. Taking back the road on your terms has never been easier.

      Application. This Airaid PowerAid Throttle Body Spacer is designed to fit 2014-2022 Silverado's with a 5.3L engine.

      Please Note. This Throttle Body Spacer is not legal for use in California or any other states adopting California emission standards.

      Shop All Truck Parts And Accessories

      Shop All Truck Throttle Bodies And Accessories

      Fitment: 2014 2015 2016 2017 2018 2019 2020 2021 Details

      Airaid 200-543

      CA Residents: WARNING: Cancer and Reproductive Harm -

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Spacer
      • (1) Gasket
      • Installation Hardware

      Customer Reviews (100+)

        Questions & Answers

        10 More Questions

        Will It Fit My Silverado 1500

        • 5.3L V8 - 14, 15, 16, 17, 18, 19, 20, 21

            Related Silverado 1500 Categories