(approx) 10 Minutes
Simple installation for anyone.
$399.00+ $40.00 Handling Fee with FREE Shipping
Open Box from $199.50
Hey, guys. It's Sara with americantrucks.com, and today we have a review and install of the Extang Trifecta 2.0 Tri-Fold Tonneau Cover fitting your '19 and newer Chevy Silverado 1500 with short or standard bed. This is perfect for the Silverado owner who's looking for a budget-friendly soft cover that installs easily and folds away quickly. This covers soft tri-fold design features easy lock clamps to secure your cover in seconds. It's constructed from an aluminum frame and a vinyl top with a sleek black finish and weatherstripping all around to keep out the elements.So one thing I want to note with this cover as with any softcover, is that it's not going to provide as much protection as a hard cover would. It's not gonna pass the knife test. However, if you're looking for a quick and easy way to get your bed covered, this is an excellent choice.So as far as price goes, this one comes in at around $400 making it one of the most budget-friendly tonneau covers for your Silverado. And for your money, you get a tonneau cover that folds away in seconds and install is a breeze.Speaking of installs, I'm giving this one a one out of three wrenches on the difficulty meter. It features a direct bolt up installation that is very simple and can be done in approximately 10 minutes. So with that said, let's jump into our install. For this install, you will need a ratchet, a 13-millimeter socket, and the included Allen key.All right, so the first step in our install, you're gonna set the tonneau on top of your bed. Make sure it's even with the bulkhead, and then we're gonna fold it out and clamp it down.So the first step is you clamp in the section that sits back by the bulkhead of your truck. Take your clamp out and line it up with the bed. Make sure it's getting a good grip on the side here, then we're just gonna twist this knob to tighten. Let it go until it's snug and then give it an extra turn or two to make sure there's a good seal. Repeat that on the other side.So at this point, you can unclip your cover and fold it out. Just make sure that it still lines up to the bed of your truck and if you need to make any adjustments, you can do so now.All right, so because of the way the clamps sit on the cover, we do need to install these brackets and they are side specific. So we're starting with the driver's side. It should look like this, and it's gonna install over these two holes in the side of your bed right here. You also need this threaded plate. Line it up inside the truck. And then grab your hardware. This should be the bolt hardware. There's also Allen head hardware that's for the other side. Go ahead and thread it into place. There is a little bit of adjustability here if you do need to move it around to clamp it better. All right, so we can go ahead and tighten this down. Grab a 13-millimeter socket and let's get these tight.Now we can install the passenger side bracket. These do look a little bit different. You'll do it sort of the same way, except we're gonna use this one hole in the side of the bed. So you do need to remove this plug. Now you are going to take this bracket and it's just gonna go right inside here, lining up both bolt holes with this one hole in the side of the bed. Line up your bracket and using the Allen head bolts, install your hardware. Using the included Allen key, tighten it down.With our brackets installed, you can now shut the last panel of the cover and we're gonna install these clamps here. Pull them out. They sit nicely into this rail for when you're folding your cover up. Just pull them gently down, slide them into position, and then you'll pull down on the lever and clamp them in place. Repeat that on the other side.All right, so now you can double-check that your cover sits nicely and if you need to make any adjustments you can do so now. But that is gonna do it for the review and install of our tonneau cover. Remember for all things Silverado, keep it at americantrucks.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Truck Bed Protection. Keep your truck bed in its pristine condition for several years by installing this Extang Trifecta 2.0 Tri-Fold Tonneau Cover. This bed cover makes use of snap-on seals so that your truck bed will have full protection against weather elements and debris. Furthermore, it has EZLock clamps, allowing you to fold the cover up and lock it in place.
Tri-Fold Design. This Extang Trifecta 2.0 Tri-fold Tonneau Cover has a tri-fold design. This enables you to easily operate, remove, or store the bed cover depending on your needs. The tri-fold design also makes your Chevy achieve a sleeker look with its softer curves and more contoured appearance.
High-Quality Construction. Extang only makes use of high-quality materials in the construction of this tonneau cover. The cover itself is made of heavy-duty, leather grain fabric that can hold up to any weather conditions. In the meantime, its frame is constructed of aircraft-grade aluminum to provide greater structural strength.
Easy Clamp-On Installation. This tonneau cover installs super fast. It uses an easy clamping system and requires zero-assembly.
Lifetime Warranty. Extang is confident about the quality of their products. Hence, they are backing this tonneau cover with a lifetime warranty for the assurance of their customers. For more warranty information, please visit the Extang website.
Application. This Extang Trifecta 2.0 Tri-Fold Tonneau Cover fits 2019-2021 Chevrolet Silverado 1500 models.
Shop All Truck Parts And Accessories
Shop All Truck Bed And Tonneau Covers
Shop All Truck Exterior Accessories
Fitment: 2019 2020 2021 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 10 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions
It is not Compatible on Silverado 1500 Limited Models, fits the New Body Models Only.