Max Trac 3-Inch Lift Spindles with Extended Brake Lines

Simple DIY Lift. Providing high quality lift spindles that work with any rear lift, the Max Trac 3-inch Lift Spindles with Extended Brake Lines are a high quality choice for making your 2007-2016 Silverado ready to accept 33-inch aftermarket tires. Providing the necessary clearance for those large off-road tires, these spindles raise the front suspension by 3 inches, while increasing track width by 0.5". These do-it-yourself parts are made to need no cutting, grinding, or welding for installation, and keep the correct front end geometry without further adjustments. The ride stays as smooth as stock with these components installed, and the shocks do not need to be replaced.

Quality Construction. The Max Trac 3-inch Lift Spindles are made from ductile iron, using sturdy one-piece construction. The brake line extensions are DOT approved and are street and highway legal. Some slight trimming for complete fender well clearance may be necessary depending on the tire size and truck configuration. These lift spindles are covered by Max Trac's limited lifetime manufacturer’s warranty.

Application. 2007-2016 Chevrolet Silverado 1500 pickups with 2WD and factory cast steel control arms are the vehicles capable of using the Max Trac 3-inch Lift Spindles with Extended Brake Lines.

Shop All 1 to 2 Inch Truck Lift Kits

Shop All Truck Parts And Accessories

Shop All Truck Lift Kits

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov