BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks (2008 4WD RAM 2500 Power Wagon)Find parts that fit my vehicle

Commanding 4-Inch Lift with Clearance for Larger Tires. Engineered to improve stance, ground clearance, and overall capability, the BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks raises your Power Wagon approximately 4 inches while creating clearance for compatible tires up to 36 inches with an appropriate wheel setup. Its comprehensive suspension configuration combines gas-specific lift components, corrected suspension geometry, heavy-duty rear support, and premium FOX damping for confident performance across highways, rough roads, and demanding off-road terrain.

Progressive Pro-Ride Coil Springs Deliver Smooth and Predictable Performance. Featuring full-length gas-specific progressive-rate front coil springs, the BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks establishes the intended ride height while maintaining controlled suspension movement across varying terrain. High-tensile steel construction and properly sized spring wire provide dependable strength and reliability, helping the suspension deliver consistent performance without premature coil bind.

Control Arm and Steering Correction Maintain Proper Lifted Geometry. Incorporating longer lower control arms, upper control arm relocation brackets, a forged drop pitman arm, and a heavy-duty track bar drop bracket, the BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks helps maintain proper axle positioning, caster control, and steering relationships after lifting. Front sway bar correction further supports handling performance while allowing the suspension and steering systems to operate predictably throughout their ranges of movement.

Heavy-Duty Rear Lift Blocks Create a Balanced Lifted Stance. Utilizing cast iron rear blocks with longer U-bolts, the BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks raises the rear suspension to complement the increased front ride height. Tapered block construction helps maintain proper pinion angle, while offset steel pin and hole positioning helps restore axle location for dependable driveline operation and a cohesive front-to-rear profile.

FOX 2.0 Performance Shocks Deliver Premium Monotube Damping. Equipped with 2-inch impact-extruded aluminum shock bodies, internal floating piston monotube construction, CNC-machined 6061-T6 aluminum mounting ends, 5/8-inch hard chrome-plated heat-treated alloy steel shafts, and application-specific valving, the BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks provides responsive damping and efficient heat management. Race-developed high-flow piston technology completes a premium suspension upgrade for 2008 4WD RAM 2500 Power Wagon Models.

Installation. Putting this BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks on your vehicle takes a day to install.

Warranty. There is a limited lifetime warranty on this product.

Application. The BDS 4-Inch Suspension Lift Kit with Rear Lift Blocks and FOX 2.0 Performance Shocks fits 2008 4WD RAM 2500 Power Wagon models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov