(approx) 2 Hours
Light to Moderate mechanical skill required.
$1,099.99 (set)+ $75.00 Handling Fee with FREE Shipping
Hey, guys, it's Joe from AmericanTrucks. And today, we're gonna be taking a closer look at the Barricade HD winch front bumper with LED lighting, fitting all '09 to '14 F-150s, excluding the Raptor models. Now, this is gonna be a great option for any F-150 owner out there that's looking for a bumper that not only looks the part, but is going to be tough enough to handle any situation with its high-build quality and the extra tools that it brings to the table, such as the winch plate and additional LED lighting.So, what do we have going on here with the HD winch front bumper? Well, first things first, let's talk about build quality. And this thing is made out of heavy duty 5/32-inch steel plate, and that is definitely going to be able to take a hit better than the factory front bumper. It's then sealed in a two-stage black powder coat, which is not just there to add to the looks. Albeit, it if you were going for the blackout look, this is going to be a perfect match. And heck, it even matches our black front grille pretty much perfectly, but it's also there to serve as a protective layer against the elements.So, next up, let's talk about the star of the show here, this little slot in the middle, the winch plate. That is going to be a huge upgrade over any factory tow hook. If you're looking to gain some additional recovery points, that is a great tool to have is going to be able to tackle any obstacle thrown at it, from the worksite to the trail. That is a great, great feature, and one of the biggest selling points about the HD winch front bumper.This can handle up to a 12,000-pound winch, which should be tough enough to get your F-150 out of any situation you can get it stuck in. But if that was enough for you in terms of recovery points, this thing also packs two D-ring mounts and two heavy duty 3/4-inch D-rings to boot.This bumper also comes with brand new fog lights. This is gonna be a huge upgrade over the factory stuff, packing some brand new LEDs. They're IP67 waterproof, which means they can withstand up to a meter of water for 30 minutes. Aluminum housing, polycarbonate lens, exactly what you'd expect. And the color temperature they put out is going to be a nice, cool white 6,000 K. And again, that's gonna be a huge upgrade in not only the light output department, but the looks department as well. And if that wasn't enough for you, to set it over the top, they plug right into the factory wiring harness. So, they're gonna work with the factory switch, you're pretty much good to go now.Now, if your F-150 wasn't optioned with fogs from the factory, Barricade does throw in a wiring harness for you to get these to work. You can also add to the LED lighting. Right underneath this overrider bullbar style hoop right here, you could fit up to a 30-inch light bar. You can see these two mounting tabs, one on either side, and that will really allow you to customize this front bumper.So, this bumper is going to pack a ton of utility, and it certainly looks the part. But I wanna talk about some features that might not be so obvious right out of the get-go. First thing, approach angle. We're gonna get this side-by-side next to the factory bumper in a second here. But you can see that this tapers up into the front wheel well, and that is going to, overall, improve your off-roading experience when you take your truck out to the trails. Basically, to go over something, you need to get your wheel up on it, and having that area clear in front of your front tire is really gonna help with that approach angle.Another great feature I wanna talk about is going to apply to the EcoBoost owners out there. One thing you wanna consider, a lot of times, with a winch front bumper like these, you're putting a winch pretty much right in front of your intercooler, and that can block some airflow. Thankfully, Barricade has thought of that. You get these awesome windows here with that grating in the middle, and that's going to allow you to keep the airflow to your intercooler and keep your engine at peak operating temperature.Now, pricing for this bumper. Obviously, this is packing a lot of features, D-rings, fogs, winch, overrider hoop, so this isn't gonna be the most budget-friendly out there. Now, we're looking at around 1,100 bucks, and they're definitely cheaper options if you're just looking for D-rings, if you're just looking for LED lighting, if you're just looking for an overrider hoop, and if you're just looking for a winch. But to get one that packs all those features together is really something rare, especially at that price point. And relatively speaking, this is a great return on investment.Install for this is going to be really, really simple. I'm gonna give it an easy two out of three wrenches on our difficulty meter. It is a little bit heavy, so I'd recommend bringing a buddy along as well as a case of beer to help you get this thing up into place. But other than that, there's no modification required, and the lights do plug and play. Again, if you have factory fog lights, at most, I think this will take you an hour or two in the driveway with nothing but some basic hand tools. So, without any further ado, let me show you what tools you'll need and how it's done.Tools we used for this install are going to include an impact, ratchet, sockets ranging from 21-mill all the way down the 13-mill, and an 18-millimeter wrench.Now, before we go and loosen up any of the hardware holding on our front bumper, we're going to have to crawl under our F-150 and unplug the fog lights. And in order to unplug those, we're just gonna pull back on this release tab, and push down at the same time. That should pop off just like that. We're gonna do the same thing over here on the other side as well.Now, we're gonna loosen up these 21-millimeter nuts holding our bumper to the frame rail. Now, one thing to note, this might be blocked with an air dam piece. If that's the case, you could use a trim panel removal tool to get that out of the way. And after that's done, we can come in here with the 21-millimeter socket on the impact to loosen up those nuts. That's one done. There's another one on the opposite side of the frame rail as well. And then we can come over and do the same thing on the opposite side as well.One thing to note is, these two nuts are the last thing holding the bumper to the truck. So, once you get them removed, be careful, have a hip into the bumper to hold it still, and then you can take this off.So, now we have our factory front bumper removed from our F-150. Before we put up our new HD winch bumper, I figure now would be the perfect time to put the two next to each other and point out some key differences. First things first, let's talk about build quality. We're ditching this factory styling over here with that body color and all this plastic in exchange for some heavy duty steel. 5/32-inch, this is gonna be way more durable than the factory front bumper with all of its plastic over there. And on top of that, it's finished in an awesome two-stage black powder coating, which, again, is gonna help protect this thing from corrosion, but it also gives it that awesome, stealthy look.Now, another huge difference between these two, and you can pretty much see it out front of our new Barricade bumper. But we are gonna be ditching our old school tow hooks in exchange for some better recovery options. We have the winch plate for a winch, and we have some heavy duty D-rings as well. If you ever need to pull your truck out of anywhere, or pull your buddy's truck out of anywhere, that is going to be a huge, huge improvement over those factory tow hooks. So, if we ever do get into a pinch, this Barricade bumper is going to be definitely what you want over that factory stuff.Now, as you can see on either side, this isn't the only piece of utility that the Barricade is packing. Right out of the box, it comes with these fog lights pre-installed, that is a really, really nice modern touch. And it's gonna be an upgrade in the looks department. We're ditching that old school yellow fog light over here on the factory one for a more modern LED. It's gonna be a 6,000 K color temperature, again, that's gonna be a bright white leaning very, very slightly toward the blue side, and it should throw more light as well. So, another great piece of utility that the Barricade is bringing to the table.Now, if you wanted to add to the lighting, you definitely could. We have the ability to add a 30-inch light bar right here under the overrider hoop. And speaking about that hoop, that is going to be an upgrade from the factory stuff as well.So, we're just about ready to start working on our truck again. But before we do, we do have to take some hardware off of that factory front bumper, we are gonna be reusing that in the install process.So, this is the hardware we're gonna need to remove, it is a 13-millimeter bolt, and there's a clip on the back with threads, we're gonna take that off as well. Now, if you don't see these on your bumper, sometimes they are attached to the hood release bracket.So, now we're gonna hop back over to our F-150, and we're gonna attach our winch plate to the frame rails using the 18-millimeter hardware included in the kit. This truck doesn't have tow hooks. If your truck does have tow hooks, just uninstall those and then you can use these two holes here to attach your winch plate. And again, we can go ahead and tighten that down with an 18-millimeter socket and an 18-millimeter wrench.So, now that we have the winch plate in place, we're just gonna put our bumper up to the frame rails. This already has bolts pre-installed, then we're gonna use the factory nuts to tighten the two together.Before we tighten down those nuts, which you wanna make sure all four of them are installed to hold the bumper still while you do this, we're gonna have to put on this bracket. And the way this is gonna work is, we're gonna use that bolt and nut clip that we scavenged earlier, and that is gonna go on the bracket, like so. And then this end of the bracket, this forked end, this is gonna go around the inner bolt, like so. And then up at the top, this bracket is going to connect to using that original 13-millimeter hardware to our hood release. And we're gonna do the same thing over here on the other side as well.Now, before we tighten the bracket down, you wanna tighten the bumper down, that way, the bracket gets seated correctly, and then we can come back and tighten that later. And again, this is a factory 21-millimeter hardware. And then we're gonna do the same thing for the other side.Now, all that's left for us to do is come back and tighten the top of those support brackets. Again, this is factory 13-millimeter hardware. And then we can hit the same thing for the other side.Next, we can put on our D-rings, they come with some nice isolators. There are two sides for the mount, and then on the D-ring itself, you get this rubber isolator as well.Last but certainly not least, we have to plug in our fog lights, and they'll go right to the factory harness. If your truck wasn't optioned with fog lights from the factory, they do give you a wiring harness to use instead.Guys, that is gonna do it for me. It's also gonna do it for the Barricade HD winch front bumper with LED lighting, fitting all '09 to '14 F-150s, excluding the Raptor models. As always, thank you guys for watching, subscribe for more like this one. Keep it right here at AmericanTrucks for all things F-150.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Rugged Styling. Add rugged off-road styling to your 2009-2014 Ford F-150 with a Barricade HD Front Bumper. Designed with the spirited off-roader in mind, this Bumper features a built-in winch plate that is capable of supporting a 12,000 pound winch. Additional features include an integrated grille guard hoop, LED fog lights and two high strength D-Ring mounts (D-Rings not included). Loaded with all these great features, this Barricade HD Front Bumper is ideal for both street and off road use.
Integrated LED Fog Lights. This Barricade HD Front Bumper includes two LED Fog Lights. The fog lights are equipped with high output LEDs to provide an intense 6000K light temperature. Each light has a IP67 rating providing reliable waterproof performance, thanks to a tough aluminum housing sealed with a polycarbonate lens.
High Quality Construction. Manufactured from heavy duty 5/32-inch steel plating for strength, this Barricade Front Bumper is cold formed into shape. After trimming and final finishing, Barricade then completes their Bumper in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for durability and long lasting corrosion resistance.
Direct Bolt-On Installation. Barricade engineered their HD Front Bumper to be a direct bolt-on replacement for the original stock bumper reusing the factory hardware and mounting points. There is no cutting or modifications required for a clean straight forward installation. Installation can be completed in about 2 hours with just basic hand tools and the help of a friend.
Application. This Barricade HD Winch Front Bumper with LED Fog Lights was designed for use on 2009-2014 Ford F-150 models, excluding the Raptor.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here.
Fitment: 2009 2010 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 08, 2020
Easy install, strong and looks great. Not too heavy and doesn’t squat the truck. Beware that the bumper isn’t a smooth surface it has a bit of texture to it so it doesn’t quite match the rear barricade.Helpful (0)
December 25, 2019
Best winch bumper for an EcoBoost
After years of having a winch setup for the rear receiver finally pulled the trigger on this front winch bumper so I can keep the intercooler in the stock location. By far the best winch bumper you can get and the price can't be beat! Easy install and the included lights are bright. Installed it in about an hour. Definitely recommend this bumper not just for the killer upgrade looks to your truck but for functionality as well.Helpful (0)
November 01, 2019
This thing is solid. Installing wasn't to bad. But my truck differed from the truck in the video. I had an intercooler in the way and a crossbar for it. Had to remove the crossbar to get to inner bolts for installation. Also the bracket that has the hood release on it had to be grinded down a little in the corners. To make room for the support brackets. Winch mount is super solid.Helpful (5)
Can a winch be added with a EcoBoost truck?
Yes, a winch will work with the EcoBoost models.
What size shackles do I need to fit this bumpers mounts?
with this item sit flush with the bumper body lines or is their any weird overhang and or gap issues?
If you do not have any body lift, it will look as it is shown here. A suspension lift is fine, a body lift is where the gap could come into play.
What size light bar fits on here. And what size d ring?
Does this bumper come with the winch or is that separate?
This will not come with the winch. This has a winch plate to accommodate a winch should you opt for that.
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box