Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

T-Style Running Boards; Black (15-24 F-150 SuperCrew)

Item T541847
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
On Sale

$366.29 (pair)

FREE Shipping Market Price $403.99 You Save 9% ($37.70) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Enter Zip
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

      Product Videos

      Hey, guys, Joe, from AmericanTrucks. And today, we're gonna be working with the T-Style running boards in black, fitting all '15 and newer SuperCrew F-150s. Now, these are going to be the perfect option for any F-150 owner out there looking for a cost-effective, well-built, and stealthy way to make getting in and out of their truck just a little bit easier. These are made out of a heavy-duty carbon steel, they're finished in an awesome black textured powder coating, which is not just there for looks, albeit it does match the black accents on our '17 F-150 here perfectly. That powder coating is also going to serve as a layer of protection from the elements as well.All in all, this is going to give you about 5 inches of flat area here to plant your foot on there. And we have some polyethylene, non-slip pads that run the entire length of the step. A lot of times, those non-slip pads are located to, like, a small area, like right here, or up by the driver's side, the same thing. Not with the T-Style here, these run the entire way, and they're perfect for getting in and out of your truck, even in wet or muddy conditions. Now, those non-slip pads make these perfect for the off-roader. But another thing that I think goes overlooked with a set of running boards like these is just how nice and tucked up they stay to the body of your truck. These aren't gonna rob you any clearance. In between the non-slip pads and the fact that they're nice and tight up to the body of your truck, I think these are going to be the perfect option for any off-roader.Pricing for these is one of the biggest selling points, in my opinion. The price for the pair is going to come in at about $230. And as far as the SuperCrew goes, that's one of the most cost-effective options on our website here, getting a lot of step for not a lot of money, definitely well worth the price. Install's going to be extremely easy. We're looking at a one out of three wrenches on our difficulty meter here. There are studs that come from the factory on all the F-150s underneath and they're perfect for the mounting brackets. All the F-150 sidesteps are extremely easy. It should take you no more than an hour to get both sides done with some basic hand tools. So, without any further ado, let me show you what tools you'll need and how it's done.The tools you'll need for this install are going to be a ratchet, 13 and 10-millimeter sockets, and a 10-millimeter wrench. So, it's tough to see under our F-150 here, it's very tight, this frame rail is in the way. But on the opposite side of that, we have three studs pre-installed, ready to go for mounting brackets for sidesteps. What we're gonna do is apply these plastic washers to each of the three studs in the front, three in the middle, and three in the rear. Now, these aren't designed to hold anything on per se, but more provide a layer of protection in between the aluminum body of our truck and our steel mounting brackets. If the two were touching together, it would cause some corrosion. So, we're gonna put these on, then put our brackets on the studs, and tighten them down with the nyloc nuts included in the kit.So, now, we can grab a mounting bracket. And these aren't side-specific, so you can grab any one of the six. Then, we're just gonna put some flat washers on there, and follow it up with the nyloc nuts included in the kit. Now, I'm gonna tighten these down with a 13-millimeter socket on the air ratchet. I'm gonna go right in the middle here. These do have some side-to-side adjustment. If you need that later, your sidesteps aren't lining quite up, you can always come back and loosen these and adjust. Now, we're just gonna repeat that same process for the middle and rear mounting position. And, again, we're just going to put those plastic washers on, followed by our bracket, flat washers on all 3, and then 13-millimeter nyloc nut. Now, we're just gonna come to the rear and do the same thing.Now, we can grab a sidestep. And these aren't side-specific so you can grab either one. We're just gonna put this up there and rest it on our bracket. Now, we can take our mounting bracket here with the two studs on the bottom. We can put that in horizontally, and then give it a twist 90 degrees. And I'm just gonna lift up on the running board here and get that cell bracket into our mounting bracket. Now, we can take a flat washer, lock washer, and 10-millimeter nut, and I'm gonna get these started on both of those studs. Now, I'm just gonna do the same thing for the middle and the front brackets. That way, we can get this dialed in while these are just finger-tight, and then we can come back later and tighten these down. Then, I'm just gonna lift up on the running board, get our bracket in place, and get that 10-millimeter hardware on. We're just gonna repeat the same process for the front as well.Okay. So, at this point, we have all of our hardware in place. We're just gonna tighten these down using a 10-millimeter socket. At least for this front one here, this one is kinda blocked by this lip, so I'm gonna bring out the ratcheting wrench for that. Now, we're just gonna lock in our alignment by tightening down the middle and rear brackets as well. So, like I said earlier, the install is extremely easy. All six brackets are the same, both of the steps are the same, so you can use pretty much any bracket or the step on either side, and these are extremely easy to install. But that's gonna do it for my review and install of the T-Style running boards in black, fitting all '15 and newer SuperCrew F-150s. Thank you for watching. Make sure you subscribe for more videos like this, and keep it right here at AmericanTrucks for all things F-150.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • Improves Truck Access and Safety
      • Rocker Panel Mount T Style Running Boards
      • Boasts a Heavy-Duty Carbon Steel Build
      • Black Powder Coated Finish
      • Polyethylene Step Pads
      • Sold in Pairs
      • Mounting Hardware Is Supplied
      • Fits 2015-2024 Ford F-150 SuperCrew Models

      Description

      Better Access. If you’re having trouble getting in and out of your Ford F-150, then you need to upgrade to a pair of Black T Style Running Boards. With these Running Boards installed, accessing your F-150's cab will be much easier since they will provide a functional step.

      Carbon Steel Construction. These T Style Running Boards are well-built, using high-quality materials to ensure maximum durability. The heavy-duty carbon steel used for these Running Boards is extremely strong and can take the abuse of serious off-roading. These Running Boards are completed in a black powder coated finish for impressive good looks and long lasting corrosion resistance.

      Easy, Bolt-on Installation. These T Style Running Boards are engineered to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward installation. All hardware for installation is included making this an easy job for anyone to complete

      Application. These Black T Style Running Boards fit 2015-2024 Ford F-150 SuperCrew models.

      Shop All Truck Parts And Accessories

      Shop All Truck Exterior Accessories

      Shop All Truck Side Steps And Nerf Bars

      Fitment:

      Details

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (2) Running Boards
      • Mounting Hardware
      4.7

      Customer Reviews (43)

        Questions & Answers

        10 More Questions

        Will It Fit My F-150

        • 2.7L V6 EcoBoost - 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
        • 3.0L V6 Power-Stroke - 18, 19, 20, 21, 22
        • 3.3L V6 - 18, 19, 20, 21, 22, 23
        • 3.5L V6 - 15, 16, 17
        • 3.5L V6 EcoBoost - 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
        • 3.5L V6 EcoBoost Limited - 19, 20, 21, 22, 23
        • 3.5L V6 EcoBoost Raptor - 17, 18, 19, 20, 21, 22, 23, 24
        • 3.5L V6 PowerBoost - 21, 22, 23, 24
        • 5.0L V8 - 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
        • 5.2L V8 Supercharged Raptor - 23, 24