Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

RedRock Upper Replacement Grille; Matte Black (15-17 F-150, Excluding Raptor)

Item T537722
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
On Sale

$189.99 (each)

FREE Shipping Market Price $233.99 You Save 19% ($44.00) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Videos

      So if you own a '15 to '17 F-150 in any trim minus the Raptor and for whatever reason you are looking for arguably the most affordable upper replacement grille in that nice and simple matte black finish, then you found it. I say that because at around the $200 price point, this is currently one of the most affordable options. I'm also happy to say that this thing is pretty much OEM in terms of fit and finish and every other measure. It's made out of factory grade ABS plastic, it's a direct replacement grille, no cutting or drilling is required. And yes, it does retain the factory emblem, which you can remove from your original grille, swap it over with some basic hand tools. And on that note, actually, the entire install is done with basic hand tools. So for that reason, I'm gonna give it a very simple one out of three wrenches on my patented difficulty meter.This grille does directly bolt up to the factory active shutter system, which you'll see in just a second. So, again, if you want one of the most affordable upper replacement grilles, maybe you wanna go to a blacked out build or maybe your factory grille is just looking a little worse for wear or for whatever reason, go ahead and pull the trigger on this guy. And then come back in just a second, I'll show you what tools you need and then I'll walk you through the entire install step by step. Shouldn't take us more than 30 minutes to an hour, so let's go ahead and get started. All right, to install our grille, you'll need a standard drive ratchet with 8 and 10-millimeter deep sockets. It's also very helpful to have an extension, as well as a trim panel removal tool and some channel locks. Of course, it's always helpful to have a cordless impact if you wanna work fast. All right, guys the first step of our uninstall, we have to remove the radiator cover underneath the hood here. It's a couple of push pins, so we'll need a flat head screwdriver or trim panel removal tool, like me. All right, so now that we have that cover removed, we've exposed the hardware that we have to remove from the grille and you guessed it, more push pins, right? There are four on top. Disclaimer, we remove this stuff a lot so one of ours are broken. However, there are supposed to be four up here that you need to remove, so go ahead and grab your trim panel removal tool. Once you got these removed, I'll show you what bolts we have to pull out on the sides of the grille in order to remove it completely. All right, so with those push pins removed, you can remove the grille itself, like so, it just comes out very easily. Then I'm gonna show you guys how to remove this assembly here. There's a couple of bolts on either side, you'll need an 8-millimeter socket to remove those. As you saw earlier, we removed these plastic push pins here. You don't need to remove this trim piece around the headlights entirely. You just wanna get enough plan now that you can gently peel it aside so you can see the bolts underneath there. All right, next we're gonna remove this entire assembly here. This is held on with those bolts that I just removed earlier, as well as four bolts across the top here. For the top bolts, you'll need a 10-millimeter socket. Once you've done that, make sure you disconnect this wiring harness right here, two little clip connections, just squeeze those with your fingers, pull those free, then you can remove the entire assembly from the truck.All right, so we have our factory grille removed. And even though this is considered a direct replacement, couple of things to point out here. We're getting rid of the textured black finish on here, which has kind of a satin finish on it. This is completely matte black and it's a lot smoother, actually. Personally, I'm a fan of that. I like understated and minimalist stuff. And if you're going for something like a blackout build or you're murdering out your truck and you wanna hit every little detail, this would definitely be a good placement. Now, before we ditch our factory grille here, we wanna remove our emblem. It's pretty straightforward, it's held on with a couple of washers on the back. Those actually are meant to be removed with a 10-millimeter deep socket. All right, we have our emblem in our grille. Before we throw it onto our support assembly here, we have to remove these four studs that are actually meant to hold the original grille in place. It's a little bit of a different setup. Now, to do that, you're gonna need a 10-millimeter deep socket and these like to spin inside those holes there, so it's helpful to have some channel locks, you can hold on to the puck on the end there, the threaded end of the stud, that way you can get that nut spinning freely without the entire thing spinning on you. All right, now we're finally ready to install the grille onto our support assembly here. But before you do that, you wanna remove the nuts on the studs here. For that, you'll need an 8-millimeter deep socket. All right, so once you got all these nuts and bolts removed, you can finally throw the grille onto the support assembly. Now when you do that, you wanna make sure that these three plastic prongs on the bottom line up with the holes on the support assembly, press everything down so everything's flush. And once you've done that, you can grab those nuts and bolts and you could reinstall them and tighten everything down. Our grille is finally assembled on our support assembly here, so we can throw it back in place. It's pretty straightforward, everything is done in the reverse order of what we did earlier to uninstall it. All right, so once you got your radiator cover back in place, that'll wrap up the install. And that also wraps up my review of the upper replacement grille in the matte black finish, fitting your '15 to '17 F-150. I'm Travis, and thanks for watching. And for all things F-150, keep it right here at americantrucks.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • Factory Style Three-bar Grille
      • Durable Automotive Grade ABS Material
      • Matte Black Finish
      • Direct Fit Replacement Grille
      • Reuses your Existing Factory Grille Emblem
      • Simple Installation - No Cutting Required
      • Compatible with OEM Forward Facing Cameras
      • Fits 2015-2017 Ford F-150 Models, Excluding SVT Raptors

      Description

      Upgraded Factory Appearance. Perfect for a quality repair or an appearance upgrade, this Factory Style Three-bar Matte Black Grille will add a clean OEM look to any trim level of F-150. With the same exact styling as the one found on the 2015-2017 F-150s, this Three-bar Style Grille is compatible with the factory forward facing camera.

      Quality ABS Construction. This Three-bar Style Grille is manufactured from an OEM quality acrylonitrile butadiene styrene (ABS) material, which handle the rigors of everyday use and abuse. ABS is known for its light weight, superior durability and impact resistance making it the ideal material for use on and off road. Completed in a matte black finish, this Grille will be sure to attract attention for years to come.

      Simple Straight Forward Installation. Designed to be a direct fit replacement for the original factory grille, this Three-bar Style Grille installs reusing the stock hardware and mounting points. There is no cutting or modifications required for a clean straight forward installation. Installation can be completed in about an hour with just basic hand tools.

      Application. This Factory Style Three-bar Matte Black Replacement Grille is specifically designed to fit the 2015-2017 Ford F-150 models, excluding SVT Raptor models. Compatible with the factory OEM forward facing camera. You will need to reuse your factory Ford emblem as no emblem is included.

      RedRock 4x4

      Shop All Truck Parts And Accessories

      Shop All Truck Exterior Accessories

      Shop All Truck Grilles And Front End Bras

      Fitment:

      Details

      RedRock T537722

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Replacement Grille
      4.7

      Customer Reviews (500+)

        Questions & Answers

        10 More Questions

        Will It Fit My F-150

        • 2.7L V6 EcoBoost - 15, 16, 17
        • 3.5L V6 - 15, 16, 17
        • 3.5L V6 EcoBoost - 15, 16, 17
        • 3.5L V6 EcoBoost Raptor - 17
        • 5.0L V8 - 15, 16, 17

            Related F-150 Categories