Provides Looks and Power.
Mixing eye-catching style and high-octane performance, the Spectre Performance Polished Cold Air Intake improves the flow of fresh into your 2009-2010 Ford F-150’s 5.4L engine in a big way. The rust-proof aluminum tubing has a high polish for a handsome accent under the hood, while the component also includes an oversized filter and a heat shield to ensure cold air aspiration is close to maximum. Designed to boost both horsepower and torque, plus throttle response, this quality CAI improves fuel mileage by approximately +1.5 mpg as an added bonus.
No Tune Required.
The Spectre Performance Polished Cold Air Intake is designed as a straightforward “plug and play” component that provides with benefits without any tuning needed. The intake functions just fine and provides its power and performance benefits with the factory tune on the ECU unchanged.
Large Reusable Conical Filter.
Featuring a big 7” air filter with a conical configuration, this Spectre Performance part comes with a rich red air filter that looks good contrasting with the heat shield and polished intake tube. The filter’s fabric is a non-woven synthetic material that comes pre-oiled. Fully reusable, the filter can be washed and re-oiled, then reinstalled, to greatly extend its working life.
Built for Endurance and Power.
The Spectre Performance Polished Cold Air Intake is made to last and continue pumping cold air into your F-150 engine for years, thanks to the use of superior materials. In addition to the synthetic fabric filter itself, the design features a metal heat shield with a textured black powder-coat finish. The aluminum tubing has a high polish for aesthetic purposes but is also mandrel-bent to ensure unrestricted air flow.
Retains Stock MAF.
The Spectre Performance Cold Air Intake includes a housing that fits the factory MAF (mass air flow) sensor for easy installation. There is also a PCV hose adapter for the PCV fresh air hose.
In keeping with most high-quality modern CAIs, the Spectre Performance Cold Air Intake is made for straightforward, replacement style installation. It comes with a full kit of hardware and clamps, and bolts on in place of the factory intake with no need for drilling, trimming, or other modifications.
The Spectre Performance Polished Cold Air Intake is supplied with a 90 day warranty from the manufacturer against defects in workmanship or materials. This warranty covers repair or replacement of the part in the event it is defective.
Totally CARB Compliant.
Street-legal in all 50 states, the Spectre Performance Cold Air Intake, Polished has the CARB EO Number of D-629-13. As a fully CARB compliant product, it can be used on street F-150s with 5.4L engines as well as those used for off-roading or racing. It meets the emissions requirements found in other municipalities and states that also use California’s CARB regulations as well.
This Spectre Performance Cold Air Intake is engineered for use on all 2009-2010 Ford F-150s with the 5.4L V-8 engine, excluding SVT Raptor models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov