IHC Suspension Lowering Kit; 4-Inch Front / 6-Inch Rear (21-24 2WD F-150 Regular Cab w/o CCD System)

IHC Suspension is excited to announce the most complete 2021-Present F-150 2WD Single Cab 4/6 lowering kit in the market. IHC Suspension coming from the service/installation side understood the challenges that other kits were not solving.

Our key features that differentiate us from the competition and save you money:

FACTORY RIDE QUALITY
Alignment! No notching frame pockets for camber correction.
IHC’s control arm aligns to factory specs.
Standard upper control arms for camber correction included. (No additional parts needed like camber/caster bushings or offset ball joints to align)
IHC’s control arms run Delrin bushings for maximum performance, extended bushing life, and minimal maintenance.
IHC’s flip kit has the correct pinion angle built in so no need to use pinion shims.
MADE IN THE USA!
Manufactured in TEXAS!
Lifetime warranty on all metal parts!
IHC Suspension designed our 2021-Present F-150 2WD Single Cab 4/6 lowering kit with ride quality being the #1 goal. We achieved that by lowering the front end with custom control arms. You achieve the 4” front drop with the lower control arm, keeping stock springs, shocks, and spindles where OEM ride quality comes from. Upper control arms are standard in our kit to get your camber back in specs. Most kits require customers to notch frame pockets which are more time-consuming for installers and cost more in labor for the customer. Most times if notching is not done correctly lower control arms will constantly move and throw the alignment off. Not with IHC arms though. The rear is lowered with a 6” flip kit. Nitrogen charged drop shocks are included.



TRUCK PICTURES RUNNING 285/35/20’s



REFER TO FITMENT FOR VDS. If your vehicle does not have these sensors. This lowering kit will kit!

Fitment:

• 2021 Ford F-150
• 2022 Ford F-150
• 2023 Ford F-150
• 2024 Ford F-150

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov