Free Shipping On Orders Over $75. Details

Talk to an F-150 Enthusiast
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your F-150 Enter daily!

Black Carbon Fiber Door Pillar Accents (15-19 F-150 SuperCab, SuperCrew)

$0.00
Market Price $33.99 You Save 12% ($4.00)
Our Price

$29.99

FREE Shipping on orders over $75

  • Item T527967

Will this fit your Truck?

Change Vehicle Help?
In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Custom Styling
    • Black Carbon Fiber Appearance
    • 4 Mil Wrapping Cast PVC Vinyl Material
    • Built-In Protective Clear Coat Layer
    • Air Release Technology for a Smooth Wrinkle-Free Surface
    • Pre-Cut for Ease of Installation
    • Up to 8 Years Durability
    • Applies to Exterior Door Pillar Posts
    • Fits All 2015-2019 SuperCab and SuperCrew F-150s

    Review & Installation Video

    Review & Install Video

    What's going on, guys? I'm Alex from americanmuscle.com, and this is my quick review and breakdown of the black carbon fiber door pillar accents, fitting your 2015 through current F-150 SuperCab and SuperCrew. So in this video, I'm gonna talk about who these may appeal to, the construction and materials that went into this kit, what you should expect to be spending, and then last but not least, we'll take a very quick look at the installation, where you're gonna be looking at a super easy one outta three wrenches in the difficulty meter and about an hour to get these onto your truck. So this kit should appeal to any 2015 or newer F-150 owner that's gonna be looking for a very quick to install and inexpensive modification, that I'll hit on later, or if you're just looking to protect your door pillar from any type of swirls, scratches, or grease that's gonna be coming off of your fingers when you're closing your door. So I can't tell you how quickly the pillars on my own personal F-150 started to show a little bit of signs of wear and tear only after a few miles of driving it. Now this was pretty much based due to the fact that every time I'm closing my door, I'm usually shutting it by the pillar, and most, if not all times, my hands usually aren't on the cleanest side. So what that essentially means is that grease and anything else that's coming off of your hands, gonna be touching your door pillars, and they're gonna get scratched up, greasy, as well as hazing over time. The great thing about this product is that you're gonna be creating a layer in between the pillar and your hand so that when you're shutting your door, it's not gonna be picking up anything that's coming off of your fingertips. Now again, the great thing about this is that you are going to be creating a layer between your hand and your pillars. Not only that, you're gonna be getting away with some pretty cool looks. Now, this kit I have here in front of me today is gonna be the carbon fiber kit. If that's not gonna be something that you're after, make sure to check out some of the other options on the website, where we're gonna have a brush finish as well as a matte black finish. But either way, I think these are gonna complement the lines on the F-150 pretty nicely, as well as meshing with both light and dark colors. So in terms of the construction and materials of this kit, this is gonna be designed, manufactured and printed in-house only a few feet from where I'm standing. And if you're unfamiliar with AmericanMuscle's graphics, we take a huge amount of pride in what we do here. So the greatest thing about this material is that this is gonna typically be used to wrap high-end exotic cars, and it's gonna be something that's gonna be durable, as well as last at least up to eight years. Taking a closer look, specifically, this is gonna be a four-mil cast construction, which is also gonna feature a clear-coat protective layer. And last but not least, this is also going to have a special air release technology, which essentially means that they're gonna have porous pockets on the adhesive side, which means that it's gonna give you a very painless installation, which we'll take a look at later. Something that I definitely like about our products is that we design, manufacture, and print everything in-house here. Not only that, we test them on all of our fleet cars to ensure that you're gonna have a precise fit every time. Not only that, we're gonna have these rated at up to eight years of use, so you can rest easy knowing that you're not gonna run into any issues with this material fading over time. So in terms of the pricing here, you should expect to be spending only about 20 bucks on this kit, which in my opinion, is a steal if you're looking to add an extra layer of protection on your pillars. Again, you're gonna be getting away with a very high-quality vinyl material, something that's gonna be used on higher-end exotic cars, which is not only gonna look

    Custom Styling. The factory door pillar posts on the F-150 is known to get scratches and swirl marks over time, instead of trying to clean and polish them out, cover them up with a set of AmericanTrucks Graphics Black Carbon Fiber Door Pillar Accents. These accent decals are designed to be applied over top of the factory door pillar posts, which will hide those ugly marks in the finish. On top of it all, the black carbon fiber color will add an extra level of eye catching detail to your truck.

    Wrapping Cast Vinyl. AmericanTrucks Graphics uses only the highest quality 4 mil Wrapping Cast Vinyl available on today's market. Featuring a built-in protective clear coat layer this wrapping cast vinyl is designed to last at least 8 years of harsh outdoor weather. Making it far more durable when compared to other products that were designed with thinner calendared vinyl film which starts to degrade in just a couple of years!

    Air Release Technology. Air Release Technology features miniature air channels on the adhesive side of the vinyl. This allows air to easily be squeezed out from under for a bubble-free installation and a smooth wrinkle-free surface.

    Perfect Fit Guaranteed. AmericanTrucks Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

    Application. These high quality AmericanTrucks Graphics Black Carbon Fiber Door Pillar Accent Decals are designed to fit all 2015-2019 SuperCab and SuperCrew F-150s.

    Fitment: 2015 2016 2017 2018 2019 Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (2) Driver Side Accents - w/ Keypad Cutout
    • (2) Driver Side Accents - w/o Keypad Cutout
    • (2) Passenger Side Accents
    Installation Info
    Will it fit my F-150?
    • 2.7L V6 EcoBoost - 15, 16, 17, 18, 19
    • 3.0L V6 Power-Stroke - 18, 19
    • 3.3L V6 - 18, 19
    • 3.5L V6 - 15, 16, 17
    • 3.5L V6 EcoBoost - 15, 16, 17, 18, 19
    • 3.5L V6 EcoBoost Limited - 19
    • 3.5L V6 EcoBoost Raptor - 17, 18, 19
    • 5.0L V8 - 15, 16, 17, 18, 19

    Fits SuperCab and SuperCrew Models Only.

      Customer Photos (28) Submit Your Photo

      View All 28 Photos

        Questions & Answers (6)

        5 Top Rated Questions

        Does this require the Vinyl application kit as a separate purchase?

        • We generally do recommend the vinyl installation kit as it will include everything needed to complete the installation.

        Helpful (0)

        Will this work for a vehicle with a push button code. Lock on drivers side?

        • The Black Carbon Fiber Door Pillar Accents are sent in various forms including accents for those trucks equipped with the Key Pad.

        Helpful (0)

        what type of liquid do you use to install it?

        • This is a vinyl piece. Make sure it is applied to a clean and dry surface.

        Helpful (0)

        Can these be peeled off easily if you don't desire this look later on down the road?

        • The Black Carbon Fiber Door Pillar Accents can easily be removed at any time with the use of a heat gun and some light force to lift the vinyl from the vehicle.

        Helpful (0)

        How do you remove stains from panels?

        • It would really depends on the stain and how it was caused. We would highly recommend speaking to your local, reputable detail shop on how to remove the particular stain on your Black Carbon Fiber Door Pillar Accents.

        Helpful (0)
        Post Your Question
        1 More Question
        Will this fit a 2014 f150 fx4? 1 answer

          Customer Reviews (35) Write a Review

          Overall Rating 4.5

          out of 5 stars

          Installation Time:Less than 1 Hour

          • Performance Gain 3.55 3.6
          • Fit 4.428571 4.4
          • Bang For Your Buck 4.809524 4.8



          • 5/5

            Installation Time: Less than 1 Hour

            July 12, 2019

            Better than gloss!

            2 bottles- baby shampoo in one and 70 isopropyl alcohol and water in another, follow directions in box. The alcohol/water mix helps stick the edges down, spray on edges after you get the baby shapoo/water squeegeed off. Also, remove the single screw on inside of all the door B pillars to release the window trim and allow the wrap to sit behind it.

            Svtwin73

            Year: 2019 Submodel: XLT Engine: 5.0L V8

            Helpful (0)

          • 1/5

            July 11, 2019

            Why is the die cut so off?

            Applying process is good. However, the fit is poor. You have to trim off the top and side to get a proper fit. You also cannot fold it under the trim. I do not understand why this isn't properly die cut to specs? I would need to do a lot of measuring to make a good cut prior to applying and then hope it is good. Trimming while on the vehicle only risks cutting the weather stripping or existing pillar. I couldn't use them and very disappointed. If you are satisfied with overhang that will attract dirt, then go for it. Me, I like a professional fit and look and will probably go to a wrap place.

            KrisP

            Year: 2017 Engine: 3.5L V6 Ecoboost

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            April 25, 2019

            Carbo fiber door pillar

            Easy to install well packaged and makes truck look alot better just be sure to use alot of soapy water

            2015platinum

            Year: 2015 Submodel: Platinum Engine: 3.5L V6 Ecoboost

            Helpful (0)

          • 4/5

            Installation Time: Less than 1 Hour

            April 22, 2019

            Carbon Fiber pillar accents

            Install takes a little time to iron out the bubbles beneath the film. Overall great product and appearance is beyond satisfactory.

            Gprev83

            Year: 2018 Submodel: XLT Engine: 5.0L V8

            Helpful (0)

          • 5/5

            Installation Time: Afternoon

            April 17, 2019

            Never done this in my life!

            I was actually scared I was going to mess this up, it's like one shot, you either get it right or not. I ended up buying a cheap heat gun for 30 bucks, it helped a ton. I also installed from the curb, having mostly everything at eye level made it easier as well. These turned out perfect, and added a really nice look to the truck.

            Yulof

            Year: 2015 Submodel: XLT Engine: 2.7L V6 Ecoboost

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            April 11, 2019

            Look great

            Pretty easy to install, definitely need to have a hairdryer to get them to lay flat around the edges. Really looks great on the truck much better then the glossy black.

            T

            Year: 2018 Submodel: XLT Engine: 2.7L V6 Ecoboost

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            March 11, 2019

            Carbon Fiber coolness!

            This is a nice product for a good price I would recommend it the pillars on these trucks look bad fast! They protect well!

            Nightrider

            Year: 2016 Engine: 2.7L V6 Ecoboost

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            February 19, 2019

            Pretty nice

            Easy install. Looks better than the factory shiny black in my opinion cause is doesnt show hand/ swirl marks.

            JeremyN

            Year: 2018 Engine: 5.0L V8

            Helpful (1)

          • 4/5

            February 08, 2019

            Door piller Accents

            I put these on a 2015 F150 supercrew. I must be slow because it took me over an hour, unlike others. I did have to trim some at the tops for the aftermarket rain shields but that only took a couple min. A hair dryer is a must to finish the edges, don't use a heat gun, it could actually melt them. they went on pretty easily but it was tough to get the really tiny air bubbles out. all said and done, I like how they turned out and think they look good. I'd buy them again.

            SteveM

            Year: 2015 Submodel: XLT Engine: 3.5L V6 Ecoboost

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            January 23, 2019

            Black Carbon Fiber Door Pillar Accents

            Excellent look on my '18 F150. Covers the shiny black door pillars exactly and looks like factory OEM. No longer need to worry about finger marks and wax swirls on the shiny pillar panels.

            JayS

            Year: 2018 Submodel: XLT Engine: 5.0L V8

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            November 22, 2018

            Great

            They fit perfect and look great. They are a great luck to go with black carbon fiber accents

            Gabriel

            Year: 2018 Engine: 2.7L V6 Ecoboost

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            October 17, 2018

            Black Carbon Fiber Door Pillar Accents

            Nice fit and look. Go heavy on soap and water mix for install.

            KraigS

            Year: 2017 Submodel: XLT Engine: 5.0L V8

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            October 11, 2018

            Nice addition to my Platinum

            Product is nice, install was straight forward following the directions, only downside was wrapping the squeegee with a soft cloth did not help, I ended up with irremovable marks in the finish despite wrapping the plastic squeegee in a soft cloth so it looks bad. so be careful when doing it.

            Robert

            Year: 2017 Engine: 3.5L V6 Ecoboost

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            September 25, 2018

            Carbon fiber pillars

            Good product well worth money. All there stuff they sell is very good quality

            ChrisA

            Year: 2018 Submodel: Raptor Engine: 3.5L V6 Ecoboost

            Helpful (2)

          • 4/5

            Installation Time: Less than 1 Hour

            September 22, 2018

            Great quality vinyl

            The quality of the vinyl is very very good. The application was fairly easy using the “wet” method. The only reason I gave 4 stars instead of 5 stars is because the passenger side and extra driver side were labeled wrong which caused some confusion for a moment.

            GabeC

            Year: 2018 Engine: 5.0L V8

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            September 01, 2018

            New clean Pillar Look

            Just installed the "Black Carbon Fiber Door Pillar Accents." What a great look! They add a clean fresh look that I should have done when I purchased the truck. INSTALL: If you use a mild soapy solution for the install (just like window tint/film) then you can move it around all day. Installed the keypad one first and I had no issues. Heat is your friend when doing the edges. Didn't break out my heat gun but.... I can see the benefit. Rated it 5 stars for Fit, Bang for your buck, "Performance Gain". Why? Cause just like when you were a kid and got new tennis shoes- you could run faster!

            ThaddeusP

            Year: 2016 Submodel: XLT Engine: 3.5L V6 Ecoboost

            Helpful (3)

          • 5/5

            Installation Time: Afternoon

            July 23, 2018

            Pillar Accents

            They came out really nice. Just take your time to workout the air bubbles and use a heat gun or hair dryer to clean up around the edges so it looks nice and smooth.

            Ken

            Year: 2015 Submodel: XLT Engine: 5.0L V8

            Helpful (3)

          • 3/5

            Installation Time: Afternoon

            July 19, 2018

            Black Carbon Fiber Door Pillar Accent

            So this product is a vinyl sticker and I found it hard to install and you have to line it up just right when you have a door keypad. Even when you take you time and go slow it always seams to have a few bubbles under it. If you have installed this type of product before I think it would be find but if this is 1st time trying this you might want to take it down to a shop the does this type of work and have them install it or teach yo how. I think install time would have been less if I would have been better at what I was doing with it.

            DavidC

            Year: 2016 Submodel: XLT Engine: 5.0L V8

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            July 06, 2018

            Awesome look

            These look great, easy to install. Make old beat up pillars look brand new.

            JordanD

            Year: 2015 Engine: 5.0L V8

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            June 26, 2018

            Amazing Product

            My wife and I put these all in in 20minutes never done this before. No issues with fitment or quality. Have to extra wraps to wrap something else. I did get the install kit soaked them down and the pillars went on perfect and used a blow dryer to help set them once in place.

            AlBunn

            Year: 2016 Submodel: XLT Engine: 3.5L V6 Ecoboost

            Helpful (3)

          Related F-150 Categories