Banks Power Monster-Ram Intake System with Fuel Line and Heater System Upgrade; Black (07.5-18 6.7L RAM 2500)

The Banks Monster-Ram is the best-engineered intake elbow (horn) available for the 2007-2012 RAM Cummins 6.7L. Gain responsiveness and power efficiency. Improve Mass Air Flow by 88% over the stock intake. Prevents grid heater bolt failure.

49 State Compliant
California Compliance in Progress
Fitment Note
2007.5-2012 Currently Pending Final CARB Approval

Does Not Fit Chassis Cab
Click Here for Chassis Cab Version

Key Features
Raises boost without increasing turbine drive pressure
Larger and less restrictive than stock intake
Improves flow of oxygen-rich air into cylinders
Quicker throttle response
Optimizes air pressure and distribution
Outflows stock over 88.3%
3-3/8 inch inlet
Four 1/8 inch NPT ports
Accommodates stock mounting points
Includes proprietary fuel line and all necessary hardware
Red powder-coated, Black or Raw finish
Specifications
What it does

The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.

Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.

The complete system

Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.

How it was designed

Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.

Expandable

With four 1/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.

Beats the competition

Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.

Fitment:

• 2007 Dodge Ram 2500
• 2008 Dodge Ram 2500
• 2009 Dodge Ram 2500
• 2010 Dodge Ram 2500
• 2011 Dodge Ram 2500
• 2012 Dodge Ram 2500
• 2013 Dodge Ram 2500
• 2014 Dodge Ram 2500
• 2015 Dodge Ram 2500
• 2016 Dodge Ram 2500
• 2017 Dodge Ram 2500
• 2018 Dodge Ram 2500

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov