Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Airaid Cold Air Dam Intake with Black SynthaMax Dry Filter (04-06 4.6L F-150)

Item T529133
AmericanTrucks no longer carries the Airaid Cold Air Dam Intake with Black SynthaMax Dry Filter (04-06 4.6L F-150). Please check out 1997-2003 Ford F-150 Cold Air Intakes for an updated selection.
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Adds Additional Cold Air Passages
    • Air Dam Panels Block Warm Engine Air
    • Simple Installation Using Household Tools
    • Conical Filter Provides Superior Protection
    • Low-Restriction Intake Tube
    • Amplifies Horsepower and Torque
    • Fits 2004-2006 4.6L V8 Equipped F-150

    Description

    Stronger Engine. Transform your truck with a stronger and smoother engine all by adding a new intake kit. This Airaid cold air dam intake is designed to open up the airways to your engine and help it run at optimal levels. With the kit installed you're vehicle will accelerate faster and pull harder. You will literally add horsepower and torque to your truck all with this simple addition.

    Tune Optional. The Airaid cold air dam intake is completely tune up optional. It's your decision whether or not you want to tune up your truck because it will run fine without the tune. This kit is very convenient for that reason, and a good addition to your vehicle if you're looking for a low-cost power boost.

    Smooth Flow Filter. The kit comes with a SynthaMax dry filter. It's free of oil and lets air flow through easily. The kit captures most particles with little problem, and will enhance the flow of air to your engine. The filter is easy to maintain and can be washed out when it gets clogged.

    Solid Plastic Build. Plastic may not sound strong, but this intake is made from some of the toughest plastic on the market today. That's why you can count on it to offer you unparalleled strength and performance over time. The parts resist wear and stand up to hard use capably.

    Installs Fast. In just an hour this intake installs and can be used. Add it to your pickup using the included hardware and it's ready to go. The kit doesn't require welding, cutting or any special steps at all to install properly.

    Lifetime Warranty. While a one year warranty is standard for intake kits, this one goes above and beyond that figure with lifetime protection. If you have problems with the part years after buying it, Airaid will still offer coverage for it.

    Application. The AIRAID Cold Air Dam Intake Kit with Black Filter is designed to fit 2004-2006 F-150s equipped with 4.6L V8 Engine.

    Note: Coupon codes cannot be applied to this product.

    Shop All Truck Parts And Accessories

    Shop All Cold Air Intakes For Trucks

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Premium Filter
    • (1) MAF Panel Black
    • (1) Bottom Panel Black
    • (1) Filter Adapter
    • (1) 24-3/4" Weatherstrip
    • (1) Modular Intake Tube
    • (1) Silicone Reducer
    • (1) Urethane Hump Hose
    • (1) 5/8" x 20" Rubber Hose
    • (3) Bushings
    • (1) 4.5" Gasket
    • (5) 1/4-20 x 7/8 Bolts
    • (5) 1/4-20 Nuts
    • (12) 1/4" Flat Washers
    • (7) 6-32 x 5/16" Screws
    • (7) #6 Flat Washers
    • (7) 6-32 Keps Nuts
    • (1) M6-1x25 Hex Bolt
    • (2) Rubber Grommet
    • (1) Long Bracket
    • (2) #19 Speed Clamps
    • (2) #80 Hose Clamps
    • (1) #56 Hose Clamp
    • (1) #48 Hose Clamp
    • (1) Black Hose Mount

    Tech Specs

    4.5

    Customer Reviews (31)

      Questions & Answers

      10 More Questions

          Related F-150 Categories