Free Shipping On Orders Over $75. Details

Talk to an F-150 Enthusiast
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your F-150 Enter daily!
Win A Brake Upgrade Kit From Power Stop! Enter daily!

Turbosmart Smart Port Supersonic Blow Off Valve (15-19 2.7L/3.5L EcoBoost F-150)

$0.00
Market Price $348.40 You Save 7% ($25.84)
Our Price

$322.56 (each)

FREE Shipping

  • Item T533085

Will this fit your Truck?

Change Vehicle Help?
In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Upgrade Replacement for Stock Blow Off Valve
    • Eliminate Stall Issues
    • Reduce Compressor Surge
    • Easily Handles Boost Pressure in Excess of 30PSI
    • Aircraft-Grade Aluminum Construction
    • Smoothly Integrates with Factory Computer Mapping - No Tune Required
    • 1-Year Limited Warranty
    • No CARB EO# - Intended as “Race Only”
    • Fits 2015-2019 2.7L and 3.5L EcoBoost F-150s

    Review & Installation Video

    Review & Install Video

    Stronger, Lighter, and Faster Than Stock. The Turbosmart Smart Port Supersonic Blow-Off Valve is designed to out-perform your vehicle’s plastic stock blow-off valves. Unlike stock plastic BOVs, the Smart Port Supersonic BOV is designed to resist cracking, leaking, and can handle higher boosts pressure (greater than 30PSI). The Smart Port technologies ensure that stalling is eliminated and premature venting of boost is prevented. Additionally, compressor surge is dramatically reduced during low throttle and engine load conditions.

    Integrates with Factory Mapping. The Smart Port Supersonic Blow Off Valve is designed to work with the factory mapping. No tuning is required after installation.

    Strong and Durable Construction. The Smart Port Supersonic Blow Off Valve is crafted from aircraft-grade aluminum. This gives the BOV the strength to tolerate more stress than the stock plastic BOV, especially when under increased boost levels.

    1-Year Limited Warranty. The Turbosmart Smart Port Supersonic Blow Off Valve is warranted to be free of defects in material or workmanship under normal use and if properly installed. If found defective it will be replaced or repaired if returned prepaid with proof of date of purchase. Refer to full warranty for exclusions.

    Not CARB Certified. The Turbosmart Smart Port Supersonic Blow Off Valve is not CARB certified and not legal for use in California or other states adopting California emissions standards. It is the buyer’s responsibility to verify legal use of this product for the intended application and use.

    Application. The Turbosmart Smart Port Supersonic Blow Off Valve is specifically designed for 2015 to 2019 Ford F-150 models equipped with the 2.7L or 3.5L EcoBoost engine.

    Fitment: 2015 2016 2017 2018 2019 Details

    MPN# TS-0215-1371

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (1) Model Specific BOV
    • Mounting Hardware
    Installation Info
    Will it fit my F-150?

      Customer Photos (6) Submit Your Photo

      View All 6 Photos

        Questions & Answers (14)

        5 Top Rated Questions

        Do you know if adding a blow off valve violates the warranty of the vehicle?

        • The Magnusson Moss Warranty Act: US Code – Title 15, Chapter 50, Sections 2301-2312, was created to protect consumer warranties. According to this act, a manufacturer such as Ford cannot void the warranty of a vehicle due to the use of an aftermarket part unless they can prove the aftermarket part directly cause or contributed to the failure of the vehicle.Learn more about Magnusson Moss here.

        Helpful (8)

        I looked at these on ebay. They stated that it does not fit a 2018 3.5 ecoboost in a limited. I would like one for my truck. I will buy one if you confirm that it will fit a 2018 f150 limited with a 3.5 ecoboost. Thank you, JOhn

        • This product by Turbosmart will work with your 2018 3.5L ecoboost F150 without an issue.

        Helpful (2)

        2019 F-150 3.5 Ecoboost. I recently had purchased this from my mechanic and the adaptor hole was too big to fit onto the intake. Any suggestions?

        Will this fit my 16 f150 EcoBoost? Will I also need the adapter that's $71 extra?

        How is the BOV adjusted? Notice on one end there's a HARDER and SOFTER with arrows. So does this pertain to how fast or slow the valve let's off pressure? Can it be adjusted by moving the nipple on the end, or does the body of the valve have to be turned in direction of arrows?

        Post Your Question
        9 More Questions
        Just installed this on my 2018 F150 Limited and I really like it. Wasn't hard to install. Woulda been easier if I'd had a lift but oh well. Regarding the valve itself, there are 2 arrows on the end pointing to "harder" and "softer" and I'm wondering what this is for and how to adjust it. I assume it's for how fast or slow the valve opens and let's off pressure? So how is this adjusted...do you turn the nipple on the end the direction of hard or soft? Or do you loosen the clamp and turn the whole valve assembly itself? Any help is greatly appreciated 0 answer
        hello I was wondering if this would fit a 2017 expedishion limited with 3.5 eco boost? I just didn't see anyone talking about putting it on a expedishion 0 answer
        Is there an actual installation video ? To help put this part in. 1 answer
        I've seen a couple reviews stating that it won't fit a 2015 3.5L Ecoboost, are they doing something wrong? 1 answer
        What parts would I need to hook a gauge up to this as stated in tutorial video. 1 answer
        Whats the entire purpose of a blow off valve if today's cars do not have them? I would imagine if they were necessary then Ford would install them..... 1 answer
        Is it safe to assume the two brackets it comes with that one is for the 2.7L and the other for the 3.5L? 1 answer
        Do I need to buy two for my 2017 3.5L Ecoboost? Ready to buy now! 1 answer
        Would I need to tune my truck to install this product? I have considered getting a tuner as well, but am really just thinking of upgrading the blow off valve, my intake, and my exhaust. Please let me know. 1 answer

          Customer Reviews (18) Write a Review

          Overall Rating 3.8

          out of 5 stars

          Installation Time:Afternoon

          Installation Cost:$100-$250

          • Performance Gain 3.941176 3.9
          • Fit 4.294117 4.3
          • Bang For Your Buck 3.882353 3.9



          • 1/5

            Installation Time: Less than 1 Hour

            April 15, 2019

            Psssst

            If U own 2013-16 this thing works great , makes lots of sound but 2017-19 they changed design where waccum for bov is shared with Evan system and simply instead opening bov pulls air from evap and instead getting wushhhhhh u will get pssst and u can bearly hear bov, not worth 300$, going back to original setup.

            Pat1983

            Year: 2019 Engine: 3.5L V6 Ecoboost

            Helpful (4)

          • 3/5

            Installation Time: Less than 1 Hour

            April 05, 2019

            Boost reference adapter was wrong

            Everything else fit except for the boost reference adapter I had to get the TS-0720-1005 that was mentioned in another review, other than that it sounds nice! Really noticable!

            JonathanC

            Year: 2015 Submodel: Platinum Engine: 3.5L V6 Ecoboost

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            March 23, 2019

            2018 f150 v6 twin turbo

            this blow off valve is awesome......super loud and really help the performance of truck

            PamelaD

            Year: 2018 Engine: 3.5L V6 Ecoboost

            Helpful (3)

          • 4/5

            Installation Time: Afternoon

            March 12, 2019

            Fun product to have

            Great product, sounds really good. If anyone is going to install this on their truck makes sure you follow the video instruction on the install. Took me awhile to figure out how to get rid of the engine light.

            Jabbles

            Year: 2018 Submodel: Raptor Engine: 3.5L V6 Ecoboost

            Helpful (3)

          • 5/5

            Installation Time: Shop Install

            Installation Cost: $100-$250

            March 01, 2019

            Great Sound

            This was a great upgrade to my Truck. I have 2017 F150 Limited and as my truck looks great I wanted the sound to reflect just that. In the sand dunes it sounds great an get more attention. only problem I had was I had to re-order the electrical bi-pass but that problem was resolve promptly. its a must upgrade for turbo charge cars as it makes daily driving more enjoyable and fun.

            HarlynV

            Year: 2017 Submodel: Limited Engine: 3.5L V6 Ecoboost

            Helpful (5)

          • 2/5

            February 20, 2019

            Wrong part

            The kit did not fit my 2015 3.5 Ecoboost so I returned it. I only gave it a two because I like the company.

            PhillipR

            Year: 2015 Submodel: Lariat Engine: 3.5L V6 Ecoboost

            Helpful (4)

          • 1/5

            Installation Time: Afternoon

            November 13, 2018

            Not worth it

            Not only did I have to pay Ford hundreds to try and fix the check engine lights I have to pay them again to remove it and put it back to stock. I recently tore my rotator cuff so I can’t do it myself. Has a cool sound when works properly but it kills the Hp. Stinks that I have now invested 550 in this thing and will end up back in the box in my garage. They tell me it’s “rare” that it doesn’t work the way it’s supposed to. Lol

            RandallT

            Year: 2017 Engine: 3.5L V6 Ecoboost

            Helpful (9)

          • 2/5

            Installation Time: Less than 1 Hour

            November 05, 2018

            READ CAREFULLY!!

            First off American Trucks does a pretty solid job at getting their equipment correct. This one time though they did not. The BOV, mounting bracket, hosing, will fit the models shown. But before you order, check which Boost reference adapter you will need. Whether it but the T-connection which is provided or it may be part number TS-0720-1005 (on turbosmarts website)! Although this does show to fit the 15-19 year models, the boost reference adapter provided did not fit my 15’.

            ChristianB

            Year: 2015 Submodel: Platinum Engine: 3.5L V6 Ecoboost

            Helpful (14)

          • 5/5

            Installation Time: Weekend

            August 09, 2018

            2016 Lariat 3.5L DIY install.

            First the install on intercooler was simple, but going top for the EVAP connection behind the throttle body on intake manifold was tricky for people who are going by instructions or video from Turbosmart. Issues if only 2016 3.5L that three split adapter would not fit the valve on the manifold, instructions and video not same install, and for holes to EVAP valve seem scary when put it on way too tight fear that it might break. First used bottom valve that trace back to the EVAP, also used that clip connector just removed factory line and place the three way split adapter on the clip connector, has to be perfectly straight or it will leak I'm keep an eye on it if all fail J.B weld that thing. And take your time put holes on EVAP valve will go in just be careful. I had install both Full Race transmissions cooler and radiator, and AFE intercooler and hot/cold pipes so time wise 2 1/2 days. But BOV sound is awesome with all my other upgrades tuner,cai, pedal commander, borla exhaust, 73mm throttle body, and much more cause getting tired with this review so if you're addicted to upgrading than why not.

            OmarV

            Year: 2016 Submodel: Lariat Engine: 3.5L V6 Ecoboost

            Helpful (10)

          • 5/5

            Installation Time: Less than 1 Hour

            July 23, 2018

            Fun product

            Great product. I will suggest if you plan on upgrading your intercooler and the BoV do it at the same time. Great sound easy install.

            ThomasL

            Year: 2017 Submodel: XLT Engine: 3.5L V6 Ecoboost

            Helpful (8)

          • 5/5

            Installation Time: Less than 1 Hour

            July 18, 2018

            The loudest bov ever!

            It's great if you love turbo blow off valve sound, you will definitely turn some heads!

            Rashid

            Year: 2013 Engine: 3.5L V6 Ecoboost

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            July 16, 2018

            Turbosmart sp supersonic

            Install was quick and simple, nothing crazy... The Bov itself does exactly what it's supposed to do and sounds pretty crazy to be honest! Might be a bit much for some but I dig it!!!

            DanielM

            Year: 2016 Engine: 2.7L V6 Ecoboost

            Helpful (12)

          • 5/5

            Installation Time: Less than 1 Hour

            June 14, 2018

            Great

            Was simple to install and sounds great. Theres a great install video on turbosmarts website.

            babyhuey

            Year: 2018 Submodel: XLT Engine: 3.5L V6 Ecoboost

            Helpful (12)

          • 5/5

            Installation Time: Less than 1 Hour

            May 28, 2018

            Awesome product

            Was very easy to install took less then an hour to do (using power tools), perfect upgrade for if you tune the truck. Stock one would leak boost. Installed this and instantly felt better and held the boost no problem!

            john5oh

            Year: 2017 Engine: 3.5L V6 Ecoboost

            Helpful (14)

          • 5/5

            Installation Time: Afternoon

            May 19, 2018

            Awesome

            Love it made my truck sounds good you can hear it coming

            KevinR

            Year: 2017 Submodel: XLT Engine: 2.7L V6 Ecoboost

            Helpful (13)

          • 4/5

            Installation Time: Less than 1 Hour

            May 16, 2018

            Sounds great, easy instal

            There were no installation instructions that came with it and finding them online was a bit of a task. Mechanically inclined people should have no problems figuring it out though. Once I figured it out it was an easy install and I am happy with the sound.

            BrendenL

            Year: 2016 Submodel: XLT Engine: 2.7L V6 Ecoboost

            Helpful (13)

          • 1/5

            Installation Time: Afternoon

            April 25, 2018

            Adapter for kit

            This kit does not fit the 2013 f 150. The adapter is wrong part.my truck is down now for two days and one more till part gets here. Turbo smart was really cool to work with and is overnighting part. Should be about a hour or so.

            KennethK

            Year: 2013 Submodel: XL Engine: 3.5L V6 Ecoboost

            Helpful (15)

          • 5/5

            January 19, 2018

            Awesome sound

            Installed this on my 2.7l twin turbo and the blow off noise makes the truck sound great.

            GavinJ

            Year: 2017 Submodel: XL Engine: 2.7L V6 Ecoboost

            Helpful (31)