Spectre Performance Cold Air Intake; Polished (09-10 4.6L 3V F-150)Find parts that fit my vehicle

Cooler Intake, Better Performance. Hot under hood air doesn't belong in your engine's intake tract. The higher the temperature of the incoming air, the lower the density of the fuel-air mixture going into the cylinders. Lower density means lower performance and efficiency. Let your F-150 achieve its maximum performance with a cold air intake kit from Spectre.

The Simple Solution, Done Right. With this kit, Spectre provides a tested solution that will increase performance while maintaining protection for your engine. This intake uses the stock MAFS sensor, and requires a minimum of under hood changes for installation. It was even tested to work with stock ECM programming, so no aftermarket "chip" is required.

Quality Look and Feel. Thick powder coating on the heat shields prevent corrosion. The polished aluminum intake sharpens your truck's appearance under hood. Spectre performance includes everything necessary for installation on a stock truck. Installation is quick and easy.

CARB Certified. Best of all this Cold Air Intake is 50-state smog legal under Carb EO# D-629-13.

Application. This polished Spectre Performance Cold Air Intake is specifically designed to be used on the 2009-2010 F-150s equipped with the 4.6L 3V (3-Valve) engine.

Application Note. To determine what version of the 4.6L is in your truck, you would need to refer to your VIN number. If the 8th digit in the VIN # is "W" it is the 4.6L 2V. If the 8th digit in the VIN # is "8" it is the 4.6L 3V.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov