SPE 2020-2022 GT500 Intercooler Manifold

SPE is happy to introduce our new 2020+ Shelby GT500 mustang intercooler manifold. The blower water manifold connects to the intercooler under the supercharger lid to supply it with water/coolant.  The factory piece leaves much to be desired in the flow department. Being it is a cast part flow was not the main concern ease of production and installation were.  SPE has developed our solution around optimum performance for your intercoolers cooling needs. If you track the car, weekend cruise, or daily drive it this can be a beneficial upgrade.

The SPE blower water manifold for your 2020+ Shelby GT500 includes the fittings and hose ends needed to install it. The fittings and tubes can be configured based on the type of intercooler you are running. We support the Whipple and stock intercooler core. Our stock intercooler connection tubes are .060 larger internally than the factory ones. You also have the option to run the factory size 3/4 (-12 hose) or upgrade to -16 fittings for an ice tank setup. One of the down falls of the 2020+ GT500 when modifying them for more power is the lack of a manifold pressure reference port. There isn't a place on the engine to reference boost/ vacuum which can make things difficult when installing fuel pumps that require a pressure switch, or a boost gauge etc. This means there is no need to drill and tap the blower lid when using the SPE blower water manifold. SPE's design seals the water manifold to the blower lid with the factory gasket rather than a hard to find custom o-ring. This makes it much easier to replace if needed.

Features and Benefits:

_x000D_
• Increased flow
  _x000D_
_x000D_
• Hard Anodized Black 
_x000D_
• Made from 6061 billet aluminum
_x000D_
• Works with factory or Whipple intercooler core 
_x000D_
• Pressure port for vacuum and boost
_x000D_
• Retains proper sized coolant vent hose
_x000D_
• Stainless steel Intercooler connection tubes (same material as factory)
  _x000D_
_x000D_
• Large Internal diameter intercooler tubes
  _x000D_
_x000D_
• Uses factory gasket for ease of installation and replacement  
_x000D_
• Includes all necessary fittings and hardware to install
_x000D_
• One of the cleanest and best flowing kits on the market 
_x000D_

Kit Includes:

_x000D_
• Blower water manifold
  _x000D_
_x000D_
• All required fittings, O rings and plugs
_x000D_
• 2 Intercooler connection tubes
  _x000D_
_x000D_
• 2 Hose ends
  _x000D_
_x000D_
• 2 ORB AN adapters
  _x000D_
_x000D_
• All required hardware
_x000D_

VEHICLE COMPATIBILITY:

_x000D_
• 2020-2021 Ford GT500
_x000D_

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov