How to Install Smittybilt M1 S/S BLK Wire Mesh Grille on your F-150

1. Inspect product and check components with items listed above.

2. Pop Hood, remove plastic shroud at the top and set fasteners aside.

3. Optional: Using factory instructions, remove the entire front grille shell (as pictured in all Figures).

4. Attach the 95°L Brackets to the screws on the top of the grille, secure them with flange nuts.

5. Attach the 85°L Brackets to the screws on the bottom of the grille, secure them with flange nuts.

6. Attach the 90°L Brackets to the other screws on the grille, secure them with flange nuts.

7. Position the Grille onto grille shell cavity (Fi•ure 2).

8. Mark locations for drilling on the shell through the holes of L Brackets. Then drill holes on those locations.

9. Attach the Grille to the shell by inserting the screws through the tabs of L Brackets and holes on the shell; secure them with Flange Nuts provided (Figure 3).

10. Reinstall the plastic shroud with the fasteners removed in Step 2.

You will need to cut out portions of your OEM grille in order to install this part.

> Make sure shell is placed on a clean surface

> Use the M1 grille to determine the appropriate parts of the OEM grille shell that will need to be cut out

> Most applications require a lip to be left on the grille shell in order to attach the included brackets

> Tape off all areas that will be cut to protect the finish of the grille shell

> Use extreme caution when cutting or drilling

> Its recommended to cut a little large and then trim access where needed

> Clean all cuts with a file

> Once cut, check fitment of grille and brackets to determine if more of the shell needs to be cut out

We recommend normal cleaning by using mild soap and water also applying a non-abrasive aluminum polish on a regular schedule.  (Taking into consideration your climate and driving time and conditions.)