Free Shipping On Orders Over $75. Details

Talk to a Silverado Enthusiast
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $4,000 In Upgrades!!! Enter Now

SLP 3-Inch Single Exhaust System; Side Exit (14-18 5.3L Silverado 1500)

Item S101436
Call a Silverado Enthusiast at 1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $677.94 You Save 12% ($77.99)
Our Price

$599.95

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      SLP's cat-back exhaust is a good option if you're looking for a good bump in sound that's going to give you a deep muscle car sound. I'll be giving it three out of five on our loudness meter. The whole kit is going to bolt directly in place of your stock exhaust and use the same side exit. So, I'll be giving it one out of three wrenches on our difficulty meter and expect it to take about two hours. Just south of 600 bucks is a good price for a stainless steel cat-back. This sits right in the middle in terms of pricing for your truck. You could spend a bit more if you wanted a full 304 stainless, or you could save some money by going with an aluminized steel cat-back exhaust. Our first step in removing the old stock exhaust is to lubricate all of the rubber hangers and clamps so we can remove the stock exhaust in one piece. You're going to use a 13-millimeter socket to loosen the clamp behind our catalytic converter. It's located right here. Loosen. Pull this out of the way. All that's left holding our stock exhaust in is some rubber hangers. I'm going to use an exhaust hanger removal tool to remove the exhaust. Push in. All that's left holding our stock exhaust on is one hanger. Before you take it off the one hanger and remove in one piece, it's safe to have a pole jack holding the weight of the exhaust, or if you have an assistant handy. Prop up your exhaust, remove your last hanger. Our stock exhaust is now ready to be removed. It's being held up by our pole jack. I'm just going to move it out past our axle and then move it back down to remove in one piece. Now that we have our stock exhaust off our truck, this is a great opportunity to compare it to our SLP kit. As you can see here, the SLP kit is going to bolt in directly replacing our stock exhaust, because it's going to be the exact same size. Our biggest difference is going to be our muffler. It's a much smaller size which is going to allow for that increase in volume. The entire kit is mandrel-bent 3-inch stainless steel. So, it's going to allow for those free-flowing exhaust gases, and it's going to naturally resist rust and corrosion. And that leads to our 4-inch tip that's made out of 304 stainless-steel. Now that we've checked out our SLP kit, let's get it on our truck. First part of our install of the SLP exhaust is to install your over-axle pipe into the three stock rubber hangers. Place this up. So our first hanger. So the second hanger. And then slide it onto your third rubber hanger. With your over-axle pipe in place, place on one of the included clamps, and then you're going to slide on your included muffler. Place your muffler into your over-axle pipe, slide it all the way in, slide your clamp down, and tighten with a 15-millimeter socket. There are two inlet pipes included with this kit. You're going to have to measure and then cut for your specific wheelbase. For our truck, we're going to place it up into position. So make sure it's as far back, and it's lined up with your rubber hanger and then mark here. Now that we have our inlet pipe measured and marked, we're ready to make the cut. With our inlet pipe cut, we can now place it into our muffler and the rubber hanger. Slide it into your muffler. With your inlet pipe in your muffler, take off your old clamp, and then replace with the included band clamp. And then we're going to place it. Slide your band clamp over. Tighten with your 13-millimeter socket. With our exhaust in place, now we're going to check for fitment and then tighten all of our clamps to make sure there's going to be no exhaust leaks. And now for your tip. You're going to slide on one of the included clamps onto your tailpipe, place your tip, slide it on all the way, and then slide your clamp down. And we're going to tighten with a 15-millimeter socket. That wraps up my review and install of SLP's 3-inch cat-back exhaust with the single side exit. You can check this out and more at americantrucks.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Deep Muscle Car Sound
      • Increases Flow for more Horsepower and Torque
      • 4" Polished Exhaust Tip
      • Single Side Exit
      • Mandrel-bent tubing T409 Stainless Steel
      • Limited lifetime warranty
      • Fits All 2014-2018 5.3L Chevrolet Silverado Models

      Description

      Announce your Arrival. SLP's Cat-Back Single Side Exit exhaust system for the 2014-2018 5.3L V8 Silverado is what you need to pump up the sound and simultaneously improve engine performance. Optimized tubing in combination with a high flow muffler enhance flow and reduces backpressure, for an increase in horsepower and torque. This means you get the performance to match the deep, sporty sound emanating from the 4" polished stainless steel tip.

      Durability. Manufactured from high-grade 3" stainless steel, the mandrel-bent tubing of this cat-back exhaust system offers better flow than the factory system and a significantly greater resistance to corrosion. Replacing the diminutive factory tailpipe is a single 4" T309 stainless steel (polished) exhaust tip, exiting behind and to the side of the rear passenger tire.

      Bolt-On Installation. Designed to be hassle-free, this SLP Back Single Side Exit exhaust system utilizes the original hanger positions of your Silverado. All necessary hardware is provided as part of the assembly package and the system can be mounted in less than 3 hours using just basic hand tools.
       
      Application. This SLP 3" Single Side Exit Cat-Back Exhaust system is designed to fit on all cab and box configurations available for the 2014-2018 Chevrolet Silverado models equipped with the 5.3L V8 engine.

      Shop All Truck Parts And Accessories

      Shop All Truck Exhaust

      Fitment: 2014 2015 2016 2017 2018 Details

      SLP 620074

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • Muffler Assembly
      • Exhaust Tip
      • Exhaust Piping
      4.0

      Customer Reviews (3)

        Reviews of SLP Exhaust products have an average rating of 4.0 out of 5

          Questions & Answers

          10 More Questions

          Will It Fit My Silverado 1500

          • 5.3L V8 - 14, 15, 16, 17, 18

              Related Silverado 1500 Categories