How to Install Westin Sure-Grip Optional Light Kit on your F-150

STEP 1. Remove contents from box and check for damage. Verify all parts are present. Read instructions completeiy before beginning.

STEP 2. Determine locations prior to attaching light assy.

STEP 3. Peel tape from underside of light assy and apply firmly to running board (See Figure 1).Caution: Once light is attached it cannot be
removed. Tape is permanent. •

STEP 4. Drill holes and run wires through as shown (See Figure 2). Note: Use caution when drilling holes as not to damage light or running board.

STEP 5. Attach wires to harness and harness to vehicles lighting system per appropriate mount kit instruction sheet.
(Mount kit Instruction Sheets can be obtained at www.westinautomotive.com)