Professional Level CAI Upgrade.
Tested on the dynamometer and in the laboratory so thoroughly that nothing was left to chance, the Roush Level 1 Power Pac is a cold air intake and ECU flash tuner that sets up your 2015-2017 F-150 to run stronger and better than before. A straight power hike of +16 RWHP (rear-wheel horsepower) and +19 RWTQ (rear-wheel torque, in ft-lbs) result from the flood of cold air the Power Pac admits into your truck’s 5.0L engine. The Pac also creates a sporty induction noise and grants better throttle response – all while remaining 50-state street-legal and CARB compliant.
Engine Must be Flashed with Roush Tune.
An aftermarket tune/flash is required in order to use the Roush Level 1 Power Pac – in fact, the RDT (Roush Diagnostic Tool) utility and the flash included in the kit are considered part of the whole. The RDT software is included, as well as a flash card voucher. The actual flashing is carried out using industry standard J2534 interface tools which may require the services of dealer (dealer fee not included).
Easy-to-Use Oil-Free Filter.
The air filter of the Roush Level 1 Power Pac is made out of non-oiled synthetic material and is designed to be washable and reusable. The absence of oil makes it easier to prep the filter for use – there is no chance of adding too much or too little oil. The filter element is strengthened and given a better, more even shape by two layers of fine wire mesh inside the synthetic fabric body.
Manufactured for Endurance.
The cold air intake in the Roush Level 1 Power Pac is made from plastic, with an injection-molded enclosed air box and a roto-molded high-density polyethylene tube that will stand up to years of use and abuse. Both parts are black, with a textured surface for extra visual interest. The couplers are EPDM rubber, allowing the intake to move as the engine rocks and twists in action. The magenta filter element is synthetic fabric, and the clamps are stainless steel.
MAF Housing with Insert for Several MAF Bore Options.
The Roush Level 1 Power Pac is engineered to offer you two different installation options. You can choose to install the stock 85mm MAF, using a special insert included with the kit to close the gap around the MAF left by the extra space built-in. Alternately, you can omit the insert and instead use a high-performance aftermarket 105mm MAF, which the housing is sized to accommodate.
Easy Physical Installation.
Even a novice can install the Roush Level 1 Power Pac’s physical component, using ordinary hand tools to carry out a bolt-on application. The intake comes with all the hardware and clamps needed to mount it. Please note that flash tune of the ECU is also required to make the intake work properly once installed.
90-Day Warranty with Optional Extension.
Besides carrying a 90 day limited manufacturer’s warranty, the Roush Level 1 Power Pac has an optional 3 Year/36,000 Mile Limited Powertrain Warranty which is available through Roush. The optional warranty must be purchased within 30 days of the service installation date. Click here to see more details.
Ready for CARB States.
Now 50-state legal and usable both on-road and off-road in the state of California in addition to the rest of the United States, the Roush Level 1 Power Pac is CARB compliant. Its CARB EO Number is D-418-30.
This Roush Level 1 Power Pack is specifically designed for use on 2015-2017 F-150s equipped with the 5.0L Coyote V8 engine.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov