Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Roush Cold Air Intake (11-14 3.7L F-150)

Item T527275-B
AmericanTrucks no longer carries the Roush Cold Air Intake (11-14 3.7L F-150). Please check out 1997-2003 Ford F-150 Cold Air Intakes for an updated selection.
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Improves Airflow for Better Performance
    • Reusable High Flow Air Filter
    • NO Computer Tune Required
    • Re-Uses Factory Intake Tube
    • Simple Bolt-On Installation
    • CARB EO Number: D-418-30
    • Fits All 2011-2014 3.7L V6 F-150s

    Description

    Perk Up Your F-150 with This Intake. Made with stability and durability in mind along with a hearty increase in horsepower and torque, the Roush Cold Air Intake for the 2011-2014 F-150 with 3.7L engine is a plastic design that’s lightweight but delivers. You’ll see useful power gains at all RPM levels, with a maximum of around +10 horsepower and the same number of ft-lbs of torque. Besides the increased acceleration and towing power, your pickup truck gets more responsive with this component installed – and may even win a few extra miles from each gallon of gas.

    Tune-Free Fitment. This version of the Roush Cold Air Intake is made so that it can be installed and start functioning without the need to install an aftermarket tune as well. It works at its full capacity with the OE tune still in place.

    Washable Air Filter with Reinforcement. The air filter of the Roush Cold Air Intake is made from a high-flow fabric that is far less restrictive than paper filters (in addition to its much large dimensions). Strengthened by two layers of wire mesh, the filter can be washed and reused a number of times, with the first washing usually not needed until you’ve driven your truck around 100,000 miles (unless in very dusty conditions).

    Manufactured to Precise Standards. Bearing the famous Roush logo in molded lettering, the Roush Cold Air Intake is fabricated out of high-impact injection-molded plastic. The color is black, with a matte or slightly satin textured finish that matches other trim pieces and looks good in your engine compartment. The red filter provides a visually interesting contrast. This component is fully American-made and tested.

    Factory MAF fits in Housing. The MAF housing in the Roush Cold Air Intake is sized to accept the standard, stock CAI. This intake reuses the factory intake tube as well, so that retuning isn’t necessary in order to get it running correctly.

    Direct Fit Replacement. Installing the Roush Cold Air Intake is a simple matter of removing the stock original and bolting the new component on in its place, using the same mounting points. All the hardware you need to attach it is included in the kit, along with a full set of instructions. Application takes less than an hour.

    90 Day Warranty. The Roush Cold Air Intake is supplied with a standard 90 day warranty against defects from the manufacturer.

    Street-Legal in the Whole USA. Fortunately for those who live in California or other states with strict emissions standards, there’s nowhere in the USA that the Roush Cold Air Intake can’t be bought and fitted to your F-150 for street legal driving. The part carries the CARB EO Number #D-418-30, and can therefore be used in any location. The emissions sticker needs to show plainly when the intake is in place, for motor vehicle emissions inspection purposes.

    Application. This Roush Performance Cold Air Intake is specifically designed to fit the 2011-2014 F-150s equipped with the 3.7L V6 engine. No computer retuning required for operation.

    Shop All Truck Parts And Accessories

    Shop All Cold Air Intakes For Trucks

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Upper Airbox Lid Assembly
    • (1) Air Filter
    • (2) M8 x 1.25 x 25 Bolts
    • (2) J-Clip M8 - MAF Tube to Air Box Lid
    • (1) MAF Tube
    • (1) EPDM Seal - MAF Tube to Air Box Lid

    Tech Specs

    4.7

    Customer Reviews (500+)

      Questions & Answers

      10 More Questions

          Related F-150 Categories