How to Install Recon Projector Headlights - Smoked Lens on your F-150

STEP 1: SEPARATE ALL WHITE/RED ( )WIRES TOGETHER AND ALL BLACK (‐)WIRES TOGETHER

STEP 2: STRIP ALL RED/WHITE WIRES AND TWIST TOGETHER STRIP ALL BLACK WIRES AND TWIST TOGTHER

STEP 3: CONNECT MALE WEATHERPROOF CONNECTORS

STEP 4: USE 12” OF RED AND BLACK WIRE AND CONNECT FEMALE CONNECTOR TO ONE SIDE OF EACH WIRE

CONNECT RED WIRE ( ) TO THE RED/WHITE WIRE CONNECT BLACK WIRE (‐) TO ALL BLACK WIRES

STEP 6: USE ELECTRICAL TAPE TO PROTECT WIRES FROM WEATHER AND CHAFE

NOTE* COVER MALE/FEMALE CONNECTORS WITH ELECTRICAL TAPE AFTER OPERATIOAL CHECKS

STEP 7: CONNECT BLACK GROUND WIRE (‐) TO THE BLACK GROUND WIRE ON THE PARKING LIGHT SWITCH CONNECT RED POSITIVE WIRE ( ) TO THE PURPLE WIRE ON THE SAME SWITCH

RECON Projector Headlights Installed on a 2009‐2013 F150 / Raptor

Get Lit w RECON Today!!