Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install RBP RX-Series Mesh Bumper Grille - Chrome on your F-150

Step 1. To install your new grille you will need to Remove you grille shell from the vehicle as this will allow you to do the necessary prep wcdc so that yournew grille can be instilled The grille shell will need to be removed by removing the 6 nuts at the top option ofthe grille shell 


Step 2. You will need to cut the center portion ofthe stock grille to allow the new grille to be installed To cut the center bars you will need any type of disc cutter or Saw recoil-rill:tido mark oi.it a 1/4 inch border with a marker to allow you to see where you will need to cut You may cut the bars right to the edge of the inner leaving it flush to the edge. 


Step 3. Now that you have completed cutting the caller portion of the grille you will now be able to remove the center of the stock grille shell. 


Step 4. Inspect the inside ofthe stock grille and remove any rough edges with a disc sander this will provide an even and clean edge. 


Step 5. Once you have completed Step 4 you will now be ready to install your new grille. place it on top of the stock grille shell and place it centered as you will now begin to tighten all the handware provided ,this will secure the grille in place.


Step 6. Now that you have completed step 5 you will be ready to reinstall the grille shell back on to the vehicle using the same hardware that you previously removed. This will conclude you installation.