Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install RBP RL-Series Smooth Frame Upper Grille Insert - Black (09-14 All, Excluding Harley Davidson & Raptor) on your Ford F-150

Installation Time

30 minutes

Step 1. To instill your new guile you will need to Remove you grille shell flout tie vehicle as this will allow you to do the necessary prep work so diat your IleW grille can be installed The Mlle shell will need to be ii,noved by removing the 6 nuts at the  top portion of the grille shell. 


Step 2. You will need to an the center portion of the stock grille to allow the new grille to be installed .To cut the centerbars you will need any type of disc miter or saw. We reconnuend to mark out a 1/4 inch border with a maticer to allow you to see where you will need to cut You may cut the bars right to the edge of the inner leaving it fhish to the edge. 


Step 3. Now that you have ezu ',Octal cutting the center por-  tion of the grille you will now be able to "move the center of the stock grille shell. 


Step 4. Inspect the inside of the stock grille and remove any rough edges with a disc sander this will pmvidc an even and clean edge. 


Step 5. Once you have completed Step 4 you will now be ready to install yournew grille place it on top ofthe stock Mlle shell and place it centered as you will now begin to tighten all the hardware provided ,this will secure the grille in place. 


Step 6. Now that you have eornpleted step 5 you will be ready to reinstall the grille shell back on to the vehicle using the same hardware that you previously removed. This will con-clude you instillation.