Eliminates Drive-By-Wire Pedal Delay.
The 2011-2018 Ford F-150s are well known for delayed throttle response. This is because Ford uses a drive-by-wire system that monitors the position of the gas pedal to control the throttle electronically, similar to a dimmer switch. The problem with this setup is that the signal from the pedal has to first be sent to the ECU, which in turn then sends the signal to the actuator motor that controls the throttle body itself. This delay is most noticeable when trying to speed up to merge with fast moving traffic or pass a slower moving car. However, you can now eliminate this annoying delay for crisp throttle response with a Pedal Commander Throttle Response Controller.Four Adjustable Control Modes.
Unlike other throttle control devices that are either on or off, the Pedal Commander comes with four preset control modes for Eco, City, Sport and Sport Plus driving applications. Best of all, each mode has 8 different levels of sensitivity. This will allow you to adjust each mode to your own personal driving style and needs.Easy Plug & Play Installation.
The Pedal Commander Throttle Response Controller connects directly into the stock throttle position sensor. This sensor is found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Pedal Commander is 100% reversible, making it warranty friendly.2 Year Product Warranty.
Pedal Commander manufactures their Throttle Response Controller to the highest quality and standards with CE and TUV Certification. However, in the event you do receive a defective or malfunctioning device, Pedal Commander will replace it free of charge within 2 years of the original purchase date.Compatible with Aftermarket Programmers.
The Pedal Commander Throttle Response Controller can be used in conjunction with common aftermarket OBD-II programmers and/or monitors such as: SCT, Diablosport, Hypertech, Superchips, Bully Dog, and Edge.Application.
The Pedal Commander Throttle Response Controller is designed for use on all 2011-2018 F-150s including the FX2, FX4, Harley Davidson, King Ranch, Lariat, Limited, Platinum, STX, SVT Raptor, XL and XLT models.