Motive Gear 8.80-Inch Front and 9.75-Inch Rear Axle Complete Ring and Pinion Gear Kit; 4.88 Gear Ratio (Late 99-10 4WD F-150)

Improve Fuel Efficiency. With the Motive Gear 8.80-Inch Front and 9.75-Inch Rear Axle Complete Ring and Pinion Gear Kit, you enhance fuel efficiency when using larger tires. That means stronger performance on-road and off, without having to worry about increased costs.

Re-Gearing. When you install tires with a larger diameter than your stock tires, your factory ring and pinion kit have to rotate more to turn them. The result is more engine power required to achieve the same performance. By re-gearing, you come closer to factory performance levels with larger tires.

Solid Construction. The 8620 steel used to make these ring and pinion sets ensure they’re strong enough to handle years of daily spinning.

Professional Fitting Suggested. The intricacy of the installation process means that professional installation is recommended in most cases. Those installing at home will need to have an expert understanding of their vehicle’s drivetrain.

Covered By Warranty. You’re protected against manufacturing and material faults with a limited warranty that lasts for either 50,000 miles or 1 year.

Application. The Motive Gear 8.80-Inch Front and 9.75-Inch Rear Axle Complete Ring and Pinion Gear Kit is designed to fit Ford F-150 4WD models built between late 1999-2010.

Application Note. The rear ring and pinion set requires a 9.75 carrier, with the front set needing an 8.8 IFS carrier.

Fitment:

• 1999 Ford F-150
• 2000 Ford F-150
• 2001 Ford F-150
• 2002 Ford F-150
• 2003 Ford F-150
• 2004 Ford F-150
• 2005 Ford F-150
• 2006 Ford F-150
• 2007 Ford F-150
• 2008 Ford F-150
• 2009 Ford F-150
• 2010 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov