Free Shipping On Orders Over $75. Details

Talk to an F-150 Enthusiast
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your F-150 Enter daily!

JLT V3.0 Black Oil Separator - Passenger Side (18-19 2.7L EcoBoost, 5.0L F-150)

AmericanTrucks no longer carries the JLT V3.0 Black Oil Separator - Passenger Side (18-19 2.7L EcoBoost, 5.0L F-150). Please check out 2015-2019 F-150 Engine Parts for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features, Video & Details

  • Reduces Blow-By and Engine Sludge
  • Version 3.0 - 3 oz. Capacity
  • Aluminum Honeycomb Filter with Fine Mesh Screen
  • Solid Billet Aluminum Construction
  • Black Anodized Finish
  • Passengers Side (PCV Side) Kit
  • Easy, Straight Forward Installation
  • Not CARB-Approved
  • Fits 2018-2019 2.7L EcoBoost and 5.0L F-150s

Review & Installation Video

Review & Install Video

Fuel and Oil Don't Mix. Heavy use can cause a great deal of oil to vent through the crankcase vent. Your 2.7L EcoBoost or 5.0L F-150 engine’s PCV system feeds this waste oil back into the intake system for burning in the cylinders. However, the oil can dilute fuel and lower octane. The JLT V3.0 Black Oil Separator catches the oil fumes from the crankcase vent, storing them for occasional safe disposal. The oil separator keeps your fuel pure, ensuring maximum performance in your F-150.

Version 3.0. JLT improved on the designed of their old Oil Separator with the introduction of their new and improved Version 3.0. The first big change you will notice is that the Version 3.0 Separator has a larger 3 ounce capacity, which is almost double that of their previous model. Another important difference is the filter media. Older JLT Separators used a Ford Motorcraft pre-filter, but now JLT uses a 1/2" thick 1/16th" aluminum honeycomb filter with a mesh stainless steel screen to trap even more fine oil vapors than before to prevent them from gumming up your engine.

Superior Quality. Proudly manufactured right here in the USA, this JLT Performance Air/Oil Separator is CNC-machined from a solid block of billet aluminum for superior strength. Designed with a rubber o-ring, this Separator will maintain a tight leak-free seal. The base features a knurled texture, so that it can easily be gripped for removal during routine oil changes. JLT then completes their Catch Can in a durable clear anodized satin finish for impressive good looks and long lasting corrosion resistance.

Easy Straight Forward Installation. JLT designed their Separator to be an easy straight forward install that can be completed in under 30 minutes using basic hand tools. The included PCV silicone hoses feature pre-attached stock-style quick-disconnect fittings making JLT's Catch Can a true plug-n-play upgrade. All the necessary brackets and hardware are included with no cutting or extra modifications required.

Not CARB Certified. This JLT Performance Air/Oil Separator is not CARB certified at this time; therefore, it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.

Application. This Satin JLT V3.0 Oil Separator is specifically designed to be used on the passenger side of the 2019 F-150s equipped with the 2.7L EcoBoost or 5.0L engine.

Fitment: 2018 2019 Details

MPN# 3026P-B

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Oil Separator
  • (1) Mounting Bracket
  • (1) Fine Thread Machine Screw
  • (1) J-Clip
  • (1) M6 Bolt
  • (1) 22 in. Hose with 90 Degree Fitting
  • (1) 22 in. Hose with 45 Degree Fitting
Installation Info
Will it fit my F-150?

You Might Also Like

Customer Photos (12) Submit Your Photo

View All 12 Photos

More Products You Might Like

Questions & Answers (5)

5 Top Rated Questions

Do you need to drain the can ? If so, how often ?

  • It really just depends on how much you're driving, however most people at least check the catch can the same time you check your oil in general. You may not need to clean it this often but it's never bad to check and be sure on a somewhat regular basis.

Helpful (1)

i see thers one for the passenger side and a driver side do i need both?

  • You would not need both no. The passenger side tends to be the side that is most useful in needing an oil separator.

Helpful (1)

I see that this is for the passenger side do you guys sell one for the drivers side also? 2018 f-150 2.7L

Does this installation affect the warranty on a new 2018?

  • This should not affect your vehicle warranty.

Helpful (0)

With the 5.0L V8 application would the engine connection be the same if a Roush Supercharger is installed?

  • This kit is not designed to work with the Roush Supercharger installed.

Helpful (0)
Post Your Question

People who viewed items you browsed also viewed

Customer Reviews (20) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 4.25 4.3
  • Fit 4.8 4.8
  • Bang For Your Buck 4.7 4.7



  • 5/5

    Installation Time: Less than 1 Hour

    January 29, 2019

    Doing its job

    Installed this summer with about 3k miles on the truck, got an oil change at 5k, just checked the catch can (6k miles now) after running the truck for 5-10 minutes and it was 1/4 full of black oil with some milk at the bottom. Checked the dipstick and the oil looks brand new.

    Carl

    Year: 2018 Submodel: Lariat Engine: 5.0L V8

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    December 19, 2018

    Oil Separator

    Perfect fit. My only gripe was the hardware to mount the bracket. I had to use a different nut instead of the supplied clip. Otherwise, great kit.

    DonH

    Year: 2018 Submodel: XLT Engine: 5.0L V8

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    December 19, 2018

    Easy Install

    Easy to install.. The money spent now on products like this could save you money down the road on repairs. As well as maintaining the factory power.

    JeremyB

    Year: 2018 Submodel: XL Engine: 2.7L V6 Ecoboost

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    December 14, 2018

    Catches the oil!

    The install was easy. The only difference I found between the instructions and how it actually went in was on the air intake (suction) side. The bend in the hose was going to be very sharp so I took a slightly different path. I had plenty of hose provided and it worked out. After about 200 miles I checked and there was almost an ounce of oil in the housing. I haven't seen any mileage or performance gains since the install.

    JeffH

    Year: 2018 Submodel: Lariat Engine: 5.0L V8

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    November 18, 2018

    easy install

    prompt delivery and worth the money to prevent future issues.

    DavidS

    Year: 2018 Submodel: XLT Engine: 2.7L V6 Ecoboost

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    November 17, 2018

    JLT

    Nice piece, noticed oil in it with n a few hundred miles. glad I installed this to keep the oil out of my intake and intercooler, very easy to install.

    FredL

    Year: 2018 Submodel: XLT Engine: 2.7L V6 Ecoboost

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    November 13, 2018

    It works

    Hasn't collected much in the first thousand miles or so but it is collecting. Very easy to install.

    Richard

    Year: 2018 Engine: 5.0L V8

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    November 05, 2018

    JLT OIL SEPARATOR

    PRODUCT WAS EASY TO INSTALL BUT I AM NOT SURE YET TO HOW WELL IT WORKS DO NOT HAVE ANY OIL IN MY CATCH CAN NEED MORE TIME FOR A BETTER REVIEW

    Michael

    Year: 2018 Submodel: XLT Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 4/5

    Installation Time: Less than 1 Hour

    November 04, 2018

    Easy install

    Easy install. Will change review to 5 if oil separator works. I still need to put some miles on it.

    RandolphS

    Year: 2018 Submodel: XL Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    October 28, 2018

    Easy install and fast

    Everything went together fine on my 2018 F-150 5.0L. It took me probably 15 mins to install and the video was great.

    KennethA

    Year: 2018 Submodel: XLT Engine: 5.0L V8

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    October 25, 2018

    happy with it

    It does its job, i couldn't be happier I love my 2018 f150 its a great truck

    Sabrina

    Year: 2018 Submodel: XL Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    October 18, 2018

    2018 F150 JLT oil separator

    The system was very easy to install everything needed to make the install easy and quick. I like the finished product look and design.

    PatrickM

    Year: 2018 Submodel: XLT Engine: 5.0L V8

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    October 04, 2018

    Super easy install

    Very easy to install with simple tools. Took 10 minutes.

    AntonioV

    Year: 2018 Submodel: XL Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    September 26, 2018

    I was a sceptic, at first...

    I was a sceptic at first, but after a tank of gas, I checked it and there was a small puddle 1/2 inch of oil in the bottom. It would have gone right back into my crank case. As advertised, easy install and collects the oil. *This one mounts to the batter "box" and not the rear of the truck. Make sure to cut the hoses before you put them on as they are difficult to remove.

    MarkP

    Year: 2018 Submodel: XLT Engine: 5.0L V8

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    September 12, 2018

    JLT Performance for my F-150 2.7L Ecoboost

    Very nice MUST HAVE mod for your Ecoboost engine. Took about 35-minutes to install, and it was nothing but “plug and play.” I very easy DIY mod, that will no doubt increase engine life and performance - Thanks JLT and American Trucks!

    ChuckW

    Year: 2018 Submodel: XLT Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    August 12, 2018

    best bang for your buck

    easy install only took 15 minutes in the drive way. overall the quality of the catch can is nice. and the with only having the catch can installed for 500-600 miles of hard driving. it caught some residual oil from going back into the intake manifold. would definintely recommend this catch can for anyone that has a 5.0 coyote or the 2.7L EcoBoost.

    MikeC302

    Year: 2018 Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    August 10, 2018

    Easy to install on my 2018 2.7L F150

    Kit came with instructions that were not clear for my year and engine. I went to JLT's website and found the right instructions. https://www.jlttruecoldair.com/ZenCart/instructions/3026P.pdf Easy to install once I got the right instructions. Great product.

    JasonT

    Year: 2018 Submodel: XLT Engine: 2.7L V6 Ecoboost

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    August 02, 2018

    Easy install

    Installed on my 2018 5.0. install was simple except for the mounting point. You do need to to drill a hole into your battery box for the can to mount. Other than that it was a easy install

    ChristianH

    Year: 2018 Submodel: XLT Engine: 5.0L V8

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    July 08, 2018

    Quick and easy install

    Very pleased with quality, fit and finish.Installation is quick and easy.

    FelixD

    Year: 2018 Submodel: XL Engine: 2.7L V6 Ecoboost

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    July 06, 2018

    JLT V3.0 Black oil separator

    The product is great and super simple to install. Pay attention to the directions and you will not have an issue

    JamesC

    Year: 2018 Engine: 2.7L V6 Ecoboost

    Helpful (7)