(approx) 1 Hour
Light to Moderate mechanical skill required.
$400.61 (kit)FREE Shipping
JLT V3.0 Black Oil Separator; Passenger Side (11-20 2.7L/3.5L EcoBoost, 5.0L F-150)
MBRP 3-Inch Installer Series Single Exhaust System with Polished Tip; Side Exit (15-20 3.5L EcoBoost F-150, Excluding Raptor & 19-20 F-150 Limited)
Turbosmart Smart Port Supersonic Blow Off Valve (15-20 2.7L/3.5L EcoBoost F-150)
Features, Description, Reviews, Q&A, Specs & Installation
Boosts Torque and Horsepower. If you want to improve your engine’s horsepower and torque, equip your EcoBoost F-150 with a Injen Power-Flow Cold Air Intake. Designed to maximize your vehicle’s performance, this cold air intake utilizes dual intake tubing and filter to pull in more air for your engine. As a result, more air becomes available for combustion with increases of up to 11 horsepower and 11 ft/lb of torque possible.
No Tune Required. This Injen Power-Flow Cold Air Intake is designed to improve the performance of your F-150 without the need of reprogramming the computer. By utilizing state of the art computer-aided designs, this Injen Intake will increase power using the factory tune. Even though a re-tune is not required for operation, AmericanTrucks recommends a custom tune to reprogram the vehicles computer (ECU) to get the best possible performance from this intake.
Powerful SuperNano Web Dry Air Filter. Built to boost your Ford’s performance, this Injen Power-Flow Cold Air Intake utilizes a pair of powerful SuperNano Web dry air filters. Featuring dry synthetic filtering material, these Filters efficiently trap dirt from the air to ensure a richer and cooler flow of air to your Ford’s engine. Using a dry filtering media, this filter is also easy to clean.
Quality Aluminum Construction. This Injen Power-Flow Cold Air Intake features intake tubes that are manufactured from top-grade aluminum for lightweight and rust-resistant. The rugged wrinkle black finish protects the intake tubes from abrasions and corrosive elements ensuring durability and longevity.
Straight Forward Installation. Designed to be a direct fit replacement for the factory intake, this Power-Flow Cold Air Intake installs with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation. All necessary parts and instructions are included.
Not CARB Certified. This Injen Cold Air Intake is not CARB certified at this time, therefore it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.
Application. This Wrinkle Black Injen Power-Flow Cold Air Intake is made to fit 2015-2020 3.5L Ford F-150 EcoBoost models, excluding SVT Raptor models.
Shop All Truck Parts And Accessories
Shop All Cold Air Intakes For Trucks
Shop All Truck Intakes: Air Intakes And More
Fitment: 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 20, 2020
Love this product guys!! If you're on the fence go ahead and jump over! I really like it. Sounds similar to a Diesel turbo noise big air sucking noise too!! Honestly its freaking sick guys!! On for 3 months and zero problems, install was about 45 minutes... very easy.Helpful (0)
May 18, 2020
Looks and sounds great! but...
As expected. looks awesome, sounds awesome and seems to be more responsive. However,,, I get a P04DB when I WOT every single time even after I clear the fault code. Looked online and its a common problem that I wasnt aware of with all the upgradable intakes you can buy with the 3.5 ecoboost. I hate check engine lights. But Im getting tuned and will have the parameters for the code adjusted to keep it off. But if I were to stay untuned then I would be a very un happy camper. And yes I installed the tube in the inlet hose for the crank case vent to turbo and it still will not keep the code off when I was stock tuned.Helpful (0)
May 06, 2020
Cold Air Intake
Good intake, certainly see and feel a difference in power and pick-up. Don’t be surprised if it kicks on your check engine light, has already happened twice to me and there wasn’t anything wrong; just reset it. Easy to install by yourself but another hand is helpful.Helpful (0)
April 28, 2020
2019 XLT 3.5 L
Super easy install, sounds amazing and got some power gains from it. One major part they left out on the install is having to pull the temp sensor out of the stock intake tube and having to extend the wiring for the sensor. 4 stars just for that reason.Helpful (0)
April 18, 2020
Great intake. Sounds great. Easy to install.........Helpful (0)
February 22, 2020
But could be better. 75 min exactly for me to install. Great instructions and the YouTube video was good. My biggest Hangul during install was the 4” angle coupler that did not actually have markings identifying the proper direction (despite instructions stating otherwise). This went in on my ‘16 F-150 3.5L Twin Turbo. I don’t hear the “purrr” that other people are talking about, instead, when I accelerate I can hear the filters sucking the air in. It sounds like an airplane jet powering up. Not impressed as of yet. Have NOT seen a mpg boost. I literally changed my oil before I installed this and drove the truck 300 miles on the highway and only got 16.7mpg. It was a hilly drive into the wind so when we head back to the house, I’ll be hoping for a 19 mpg. Btw: set cruise control at 77mph.Helpful (0)
January 25, 2020
Not sure how much it helped my mpg or hp, but those turbos sound pretty awesome now!!Helpful (0)
November 16, 2019
Get Filter kit, sounds awesome!
Install was easy. The added sound of the turbo just sounds cool. Little better MPG.Helpful (0)
September 17, 2019
Cold air intake
Looks and sounds great. Install was a breeze. We recommend.Helpful (1)
August 20, 2019
Very aggressive Sound.
I put this on my 2019 F-150 and it sounds awesome. I had a Roush Intake on my 2018 F-150 and I like the sound of this one way better.Helpful (1)
Isn’t this intake worse without the factory scoop?
Unless you're pushing your truck to such limits that require every bit of cooling you possibly would need, no it will not work any worse.
I have a 2018 F-150. Will I have any issues with the temp sensor wiring not reaching?
Any wiring necessary for the install of the intake will be able to reach it without issue.
Will this void are harm the factory warranty?
You would have to reach out to your Ford dealer in regard to if this item would void the factory warranty.
If I have a sct 93 octane tune, will I need to re-tune the vehicule?
Yes, if you have an existing tune, a new custom tune is recommended.
(approx) 1 Hour
Light to Moderate mechanical skill required.
What's in the Box