Talk to a Ram 1500 Sales Tech
1-610-990-4561
M-F 8:30A-11P ET, Sat-Sun 8:30A-9P ET
Win $4,000! Enter Daily

ICON Vehicle Dynamics 0.75 to 2.50-Inch Suspension Lift System; Stage 4 (09-18 4WD RAM 1500)Find parts that fit my vehicle

Item R102729
AmericanTrucks no longer carries the ICON Vehicle Dynamics 0.75 to 2.50-Inch Suspension Lift System; Stage 4 (09-18 4WD RAM 1500). Please check out 1994-2001 Dodge Ram 1500 Lift Kits for an updated selection.
$0.00

    Product Information

    Features, Description, Q&A, Specs & Installation

    Features

    • 0.75-2.5 in. Suspension Lift System
    • Increases Damping Ability and Wheel Travel
    • Improves Ride Quality and Vehicle
    • 2.5" Rear Piggy Back Shocks
    • Rear 1.5" Dual Rate Coil Springs
    • Accommodates up to 33 x 11.50 Tall Tires
    • No Cutting or Welding Required for Installation
    • Fits 2009-2018 4WD RAMs

    Description

    Increase Wheel Travel. If you're looking to improve the drivability, damping ability and wheel control of your 2009-2018 RAM 4WD, the ICON Vehicle Dynamics 0.75-2.5 in. Suspension Lift System - Stage 4 will deliver the performance and reliability that you need for both on- and off-road riding. With a lift range of 0.75 - 2.5 inches, this kit can accommodate aftermarket tires 33 x 11.50 tall and wheels 8"- 9" wide with a 5" backspace, giving you improved ride and vehicle quality.

    Superior Shocks for Damping and Control. This stage 4 kit includes 2.5" coil over shocks and contains an internal reservoir that provides excellent cooling properties and Eibah coil springs that deliver an ultimate feel throughout the entire range of travel. The monotube rear shocks use valuing that balances performance and balance of your truck.

    Rear 1.5" Dual Rate Coil Springs. The rear lift coil-springs by ICON creates a superior ride quality, increased towing and capacity for load carrying by lifting the rear 1.5" as well as increasing wheel travel. As a result, the dual rate spring creates a slightly softer ride compared to stock springs for more stability with regards to towing and payload.

    No Cutting or Welding Required. This direct bolt-on system requires no cutting, modifications, or welding to complete installation. The hardware required for this kit is included. The typically installation time is approximately one day.

    Limited Lifetime Warranty. Because providing high quality products is its primary goal, ICON Vehicle Dynamics backs its products with a limited lifetime warranty and will replace or repair products that are found to be defective in workmanship or materials.

    Application. This ICON Vehicle Dynamics 0.75-2.5 in. Suspension Lift System - Stage 4 is specifically designed to fit 2009-2018 RAM 4WD models.

    Shop All 1 to 2 Inch Truck Lift Kits

    Shop All Truck Parts And Accessories

    Shop All Truck Lift Kits

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    Installation Time

    (approx) a Day

    Difficulty Level:

    Light to Moderate mechanical skill required.

    Installation Guides

      No guide available for this part yet.

    What's in the Box

    • Front Coil-over Shock Kit
    • Uni Ball Tubular Upper Control Arm
    • Rear 1.5" Dual Rate Coil Springs
    • ICON 2.5" Rear Piggy Back Shocks
    • Tubular Uniball Control Ams
    • Bushing Kit
    • Necessary Hardware

    Tech Specs

    4.7

    Reviews of ICON Vehicle Dynamics Suspension Products (35)

    Questions & Answers

    No questions about this product yet. Ask the First Question

      Most Popular from SuperLift