Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Husky 2.75 in. Wide Mud Grabbers (97-18 All) on your Ford F-150

Installation Time

2 hours

Tools Required
  • Power Drill with 1/8” drill bit
  • Hex Head Drill Attachment
American Muscle
Shop Parts in this Guide

VEHICLE PREPARATION:

Your vehicle’s fender mounting area should be cleaned prior to the installation of your new Husky Long John Flares. 

Installation


Read all directions thoroughly prior to the installation of your Mud Grabber Flare. 


1. Clean the mounting location on your vehicles fender. 


2. Align the Mud Grabber mounting flange under the fender lip and press the upper lip against the outside of the fender for easy alignment. 

Note: These are general mounting guidelines and the flares can be mounted in many different ways to provide whatever cover-age you deem necessary. 


3. Use supplied self drilling screws and washers to fasten the Mud Grabber through the flare’s flange and into the fender lip. 


4. Repeat steps 1-3 on the oppisite side.