Talk to a Silverado 1500 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Hammerhead Bull Bar; Black (19-24 Silverado 1500, Excluding ZR2)

Item S112789
Verify parts fit and get product recommendations.
Silverado 1500 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$431.10 (each)

FREE Shipping Market Price $495.76 You Save 13% ($64.66) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Out of Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Ashburn - 20149

Add Local Shop Installation

Total cost of service $199.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Videos

      Hey, guys, it's Sara with americantrucks.com, and today we have a review and install of the Hammerhead Bull Bar in Black Fitting your '19 and newer Chevy Silverado 1500 excluding the Limited Model. This is perfect for the Silverado owner who's looking to add a bit of protection to the front of their truck as well as setting themselves up for lighting down the road. This bull bar is manufactured from plate steel and features a textured black powder coat finish. It's definitely beefy enough to protect you from brush if you're off-roading, or if you're on-road it will protect against some minor dings. This bull bar provides a mounting point for a 21-inch light bar and it is one of the easiest ways to add lighting to the front of your truck. So, as far as price goes, this one comes in at around $400 making it a budget-friendly way to add some protection as well some options for lighting to the front of your Silverado.I'm giving this installed two out of three wrenches on the difficulty meter. It features director bolt-up install with no cutting required. It just mounts to tow hooks and can be done within two hours. So with that said, let's jump into our install. For this install, you will need a ratchet, a small extension, 18, 17, and 15-millimeter sockets. All right, so the first step in our install is we do need to remove the tow hooks if your vehicle is equipped with them, and then we can install the brackets right in the opening that the tow hook is currently sitting in. All right, so we need to remove the two bolts that hold on the tow hook and on your driver side, this bolt is also sort of in the way. So, while you're at it, we're just gonna take an 18-millimeter socket and remove that bolt. Next up remove the bolt on the outside, you may want an extension for this one. All right, so now we're gonna grab our 18-millimeter socket again and we will need an 18-millimeter wrench.It is a little bit easier to put the wrench side on the nut so that's what we're gonna do, and put our socket on the other side and remove that now. All right, now this is a through-bolt through your tow hook, so when you pull the bolt out, your tow hook will be free. So, definitely put a hand on that and then pull it straight out. All right, so we're gonna move to the passenger side now. This is the exact same except you don't need to remove this 18-millimeter bolt. You can just remove the two bolts, the one smaller one and the large through bolt. They are on the far sides, are kind of opposite of the driver, grab your 18-millimeter socket and let's get these out. All right, grab your 18-millimeter wrench and hold the bolt steady on the inside of the frame rail. And then using your 18-millimeter socket, pull the nut on the far side. All right, once the nut is off you can pull this through bolts.So, once you free the bolt to pull the tow hook out, you just pull it down and then clear the bumper. All right, with the tow hooks removed, we can now install the brackets. These are side-specific and if you're not sure, the passenger side should say 5007, be in this configuration. So, we're gonna slide it through the hole in the bumper right where the tow hook came out of and this portion sort of sits into the frame. Sort of maneuver it in and up and that's where it's gonna sit. Moving on to the driver's side we have 5008 in this configuration, do the same thing, slide through the bumper, should feel an opening in the frame, you wanna go up a little bit to get it. All right, line the threaded hole in the bracket with the hole in the frame. There should be one on the inside of the passenger side and two on the outside of the frame. Grab the included hardware and thread it in.Now you can grab a 17-millimeter socket and tighten these down. You may want an extension to clear this bolt or you can pull the bolt out like we did on the opposite side. All right, now we're gonna repeat that process on the driver's side. This one is a little different, there are two holes on the inside of the frame and one hole on the outside of the frame. All right, grab your 17-millimeter socket and tighten these down. Replace the 18-millimeter factory bolt that we took out on the driver's side. All right, with the brackets in place, we can now grab the front of the bull bar and just place it on top of both of the brackets. There should be notches in the bottom of the bull bar, just line them up with the brackets on there and it will rest here temporarily but definitely keep a hand on it until you have a few pieces of hardware in. Make sure you grab a lock washer and washer and then thread the hardware into the bottom of the bull bar through the bracket.All right, so now if you need to, if you need the adjustability, you can definitely loosen up those bolts we just put into the frame of the truck. But wiggling the bull bar around a little bit can get us we're ready to go. Repeat that process on the passenger side installing all four bolts. Now, using a 15-millimeter socket, tighten these down. Repeat that on the other side. All right, so that is gonna do it for the review and install this bull bar, and for all things Silverado keep it at americantrucks.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Offers Reliable Protection Against Trail Hazards
      • Manufactured from 0.120-Inch Thick Plate Steel
      • Comes in a Black Finish
      • Provides a Mounting Point for a 21.60-Inch Single Row LED Light Bar
      • Direct Installation; No Drilling Is Required
      • Backed by a 1-Year Limited Warranty
      • Not Compatible Limited Models, fits the New Body Models Only
      • Fits 2019-2024 Chevrolet Silverado 1500 Models

      Description

      Protects Against Road Hazards. This Hammerhead Bull Bar is a great way to minimize damage to the front end of your 2019-2024 Chevrolet Silverado. Featuring a durable steel construction, this Bull Bar is able to fend off road debris, preventing your front end from sustaining major damage. Furthermore, this Bull Bar sports a rugged build, giving your truck a more aggressive look.

      Allows Light Bar Installation. This Hammerhead Bull Bar allows for the installation of an extra light bar. On its top bar, you will see mounting points that can accommodate a 21.60-inch single row LED light bar - not included.

      Durable Steel Construction. For guaranteed toughness on and off road, this Hammerhead Bull Bar is made with a 0.120-inch thick plate steel. Furthermore, this Bull Bar is completed in a black finish to protect against rust and other corrosive elements.

      Direct Installation. This Bull Bar offers a direct installation. It can be installed by mounting it to your vehicle’s factory location points. No drilling is required.

      Backed by a 1-Year Limited Warranty. To cover any defects in material and workmanship, this Bull Bar is backed by a 1-year limited warranty. For more warranty information, please visit the Hammerhead website.

      Application. The Hammerhead Bull Bar is engineered to fit 2019-2024 Chevrolet Silverado 1500 models. Not compatible on Silverado 1500 Limited Models, fits the New Body Models Only.

      Shop All Truck Parts And Accessories

      Shop All Truck Bumpers

      Shop All Front Truck Bumpers

      Fitment:

      Details

      Hammerhead 600-56-1026

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Bull Bar
      • Mounting Hardware
      5.0

      Customer Reviews (2)

        Brand Image

        Reviews of Hammerhead Exterior products have an average rating of 4.7 out of 5

          Questions & Answers

          10 More Questions

          Will It Fit My Silverado 1500

          • 2.7L I4 - 19, 20, 21, 22, 23, 24
          • 3.0L I6 Duramax - 20, 21, 22, 23, 24
          • 4.3L V6 - 19, 20, 21
          • 5.3L V8 - 19, 20, 21, 22, 23, 24
          • 6.2L V8 - 19, 20, 21, 22, 23, 24

          It is not Compatible on Silverado 1500 Limited Models, fits the New Body Models Only.