(approx) 1 Hour
Light to Moderate mechanical skill required.
$949.99 (each)+ $49.00 Handling Fee with FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Baja-Style. Add rugged toughness and aggressive styling to your 2009-2014 Ford F-150 with a DV8 Offroad Baja Style Full-Width Front Bumper. Suited for both street and trail applications this Baja Style Front Bumper is designed to easily replace your F-150's factory bumper.
Super Tough. This front bumper is constructed using 3/16-inch steel plate and is reinforced with 1/4-inch steel in specific locations for one of the most robust applications on the market today. The integrated winch plate can support a winch with a 12,500 pound pulling capacity .
Installation. DV8 Offroad designed their Bumper to be a direct bolt-on replacement for the original stock bumper. There is no cutting or modifications required for a clean straight forward install. Installation can be completed in about 2 hours with just basic hand tools.
Warranty. DV-8 backs their products with a 3 Year Limited Warranty. Some exclusions may apply, please see manufacturer's warranty for complete details.
Application. This DV8 Offroad Baja Style Full-Width Front Bumper with 40 inch light bar is compatible with 2009-2014 Ford F-150s, excluding the EcoBoost and Raptor models.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Shop All Truck Parts And Accessories
Shop All Truck Bumpers
Shop All Front Truck Bumpers
Fitment: 2009 2010 2011 2012 2013 2014 Details
DV8 Offroad FBFF1-04
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 04, 2020
Like the bumper the thing is I paid 1000$ for it and dose not come with the wire harness I can't believe that you guys sell a product for that much money and don't come with the wire harness connections I have to go buy it myself not happy with that and not satisfied.Helpful (0)
January 28, 2020
NOT BOLT ON!!
You will need to trim the front frame rails and notch the inboard lower corners of the truck mounting plates. I also had to notch the lower front of the frame rails. The lower end of the skid mounts to the IFS truss and reuses two bolts and nut plates from the factory truss skid. Don't think you can use this on a lifted truck. There are no instructions, I called DV8 directly. You can keep your front tow points if you like, not in the way of bumper mounting. Once the pain of mounting is over, it is great! 5 Star! Extremely solid and well engineered. There are light mounting points on the outer wings, behind the circular cutouts. The light bar is a Chinese special but very bright, decent light control (no Rigid tho, lol). Finish is a nice thick crinkle, not smooth paint. Overall a great buy!Helpful (0)
November 27, 2019
I’m a big fan. There is a new style that has the width of the bumper in three sections as opposed to one piece as pictured. This allowed me to finesse either side to sit as I wanted. I would highly recommend. Keep in mind... you will have to contact DV8 for the install instructions and it is not updated yet for the 3 piece design. You will have to cut the lower inside corners of your frame horns. Once you understand WHAT to do, not difficult at all. Would definitely buy again!Helpful (0)
March 11, 2019
The bumper looks fresh on the truck. Definently a head turner and for the price you can’t beat it. Not an exact match though. Had to do some minor cuts. Worth itHelpful (1)
January 23, 2019
Awesome bumper and light bar..... but
I got this bumper about 3 months ago and I do love how it looks but they did not specify that it couldn’t be used on a lifted trucks I had to cut bottom bracket off to make it fit. on top of that bumper sits very crooked on sides but it is tough as nails and is one of the cheapest on the marketHelpful (1)
December 20, 2018
I drive a 2010 f150. The bumper looks great and the light bar is very bright but it is not an exact fit. Hardware was missing but I was sent replacements. I love the way it looks but they should have put on the website that you will need to cut. Also there were no directions.Helpful (4)
November 09, 2018
Not a straight bolt on
It requires a minor amount of cutting to make it fit. Great product though and it does come with the led bar. Only issue i had was i did not receive all the mounting hardware required, so i had to stop by a hardware store for some bolts and nuts.Helpful (6)
September 05, 2018
Great look and style. Just what i was wanting and is a good product for the price.Helpful (6)
The product description says that the light bar is included. The Q and A section says to buy your own. Does this product actually include the light bar?
This will indeed be a front bumper and a 40" light bar.
does the belly pan come with it?
The DV8 Off-Road Baja Style Full Width Front Bumper will include the skid plate.
Would a hidden winch plate fit behind this bumper setup without the light bar? Like the rough country plate sold on your website
So will this fit an ecoboost or not and if not why wouldnt it???
I'm confused. This states "Excluding EcoBoost Raptor" but there is a guy on the question and ask part that says this will fit on an EcoBoost. And other bumpers say that they don't fit just the raptor. So will this fit an ecoboost or not and if not why wouldnt it???
No, there is not a panel included to cover the light bar cutout in the event a light bar is not mounted on the bumper.
No, the light bar does not include a wiring harness or a switch. You would need to purchase these separately.
This bumper does not include hardware or have set provisions for the license plate.
The factory hooks cannot be left on.
DV8 Off-Road designed their Bumper to be a direct bolt-on replacement for the original stock bumper. There is no cutting or modifications required for a clean straight forward install. Installation can be completed in about 2 hours with just basic hand tools.
This will work on EcoBoost models yes.
It would be recommened to use a straight40" light bar for this bumper.
This would not come with the LED light bar.
Unfortunately, we do not have an install guide for this bumper at this moment available on our site. Upon checking with DV8 it does not appear that they have available at this moment either. For further assistance with the installation of this bumper please reach out directly to our customer service department by giving us a call at 1-888-706-1096, or by utilizing our live chat support feature. We would be glad to help walk you through and assist with the installation and apologize for any issues.
(approx) 1 Hour
Light to Moderate mechanical skill required.
What's in the Box