Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Curt Manufacturing 5-Way Flat Connector - Retains OEM 7-Way Connector on your F-150

Shop Parts in this Guide

1. Locate the vehicle’s factory 7-Way attached on the drivers side near the hitch (A).

2. Separate the vehicles connector from the back side of the factory 7-Way (B). Take care not to damage the locking tabs.

3. Insert the T-Connector end between the separated connectors (C). Make sure the connectors are fully inserted with locking tabs in place.

4. Route the 5-Flat to the center of the vehicle and secure in a safe out of the way location using the cable ties provided.