(approx) 2 Hours
Light to Moderate mechanical skill required.
$1,365.00 (kit)FREE Shipping
Hey, guys. It's Sara with americantrucks.com. And today we have a review and install of the Corsa Sport Dual Exhaust System with Black Tips fitting your 2019 5.3-liter Chevy Silverado 1500. This exhaust system delivers a loud and aggressive sound thanks to its straight-through muffler design giving you pronounced rumble at idle with no drone while cruising. This exhaust features three-inch 304 stainless steel construction with four-inch black polished slash cut tips. I'm gonna give this exhaust a four out of five on the loudness meter. This delivers that loud aggressive sound you're looking for on the outside of the truck but then on the inside while you're cruising, you can still hold a conversation. You do still hear the exhaust note but is not overpowering. So, personally, I think this is the best of both worlds. Coming in at around $1,300, this exhaust is on the higher end price-wise. But for your money, you are getting a full 304 stainless steel exhaust system that is going to improve both the look and the sound of your truck. I'm giving this install a two out of three wrenches on the difficulty meter. It can be done in approximately two hours and features a direct bolt-up installation. All right. With that said, let's jump right into our install.For this install, we used: an impact gun, an air ratchet, a deep 15-millimeter socket, a 13-millimeter socket, an exhaust hanger removal tool, and a small flathead screwdriver.All right. So, the first step of our uninstall is to remove the clamp right ahead of the flex pipe so we can detach our exhaust. Grab a 13-millimeter socket and let's get this off. Once our clamp is loosened, we can remove the hangers from the rubber isolator starting at the front of your truck. Grab this removal tool and press the hanger out of the rubber isolator. Repeat that process with the rest of the exhaust hangers. So, with our exhaust completely free from our truck, we're gonna move it backwards to clear the crossmember in the front and then forwards to come out of the truck. Once it's clear of the crossmember in the front, grab your exhaust and pull it forward to get it out of the truck.Now that we have our factory exhaust uninstalled from our truck, we can put it side by side with the Corsa and really check out some of the similarities and differences. Now, right off the bat, you may have noticed the biggest difference being the tips. Now, the factory tips has that unfinished appearance. The nice black stainless of the Corsa really dresses up the rear of your truck. Now, one thing I'd like to note here is that even though the Corsa's muffler is a little bit larger than the factory muffler, it features a straight-through design. So, you're still gonna get that nice low grumble you're looking for without any drone while cruising. All right. With that said, let's get this installed on our truck. We do have to do one quick step before we can install our Corsa exhaust and that is to transfer the clamp right in the front of our flex pipe onto our new exhaust. There's a small tab here, we're just gonna lift up on it and pull back on the clamp. Using a small flathead, pry up on the tab here. And you can wiggle the clamp loose. Now, we can transfer this clamp over to our new exhaust.We can now install our exhaust starting with the flex pipe section. Routing it up and over the crossmember, meet it with our factory exhaust and then install it into the rubber isolator. So, now we can install the muffler section. But before we do that, we do wanna place a clamp over this pipe. And we're gonna do that with the bolt side down to make it easier when we go to tighten it later. Grab your muffler section with the seam pointing up so the two small holes are on the bottom for draining. And you may wanna grab a jack or pole jack to help support this while you get these installed.Next up is our over axle pipe section. With our clamp already in place, let's route it over top of the axle and get it attached to our muffler. Once it's over top of the muffler section, install it in the rubber isolators. All right. At this point, we can install our tips. And don't forget to slide your clamp over the over axle pipe first. Adjust these into a position that you like them against your bumper. And now we can get our clamps tightened down. So, starting at the front of our exhaust, make sure it's aligned with the factory exhaust and we can start to tighten down our clamps. Grab a 13-millimeter socket and tighten this down. Moving on to our muffler section, make sure it's aligned to the flex pipe. Grab a 15-millimeter deep socket and tighten it down. Line up your over axle pipe with the muffler section and tighten it down. Make sure your tips are still aligned nicely with your bumper. And once you're sure they are, tighten this down.But that is gonna do it for the review and install of our Corsa exhaust. And remember for all things Chevy, keep it at americantrucks.com.
Subscribe to our YouTube Channel
Features, Description, Specs & Installation
High-Performance, Aggressive Roar. Turn everyone’s heads with the loud and powerful sound of your Chevrolet Silverado, delivered by this Side Exit Corsa Sport Single Exhaust System with Black Tips. The straight-through muffler design and Corsa’s own Reflective Sound Cancellation (RSC) technology help produce a loud and aggressive roar as you accelerate and at the same time eliminate cabin drone at cruising speeds.
Significant Performance Gains. This single exhaust system features a non-restrictive, straight-through muffler design that is specifically engineered to increase and optimize exhaust air flow. When you have free-flowing exhaust air, you also have reduced backpressure and therefore more horsepower and torque. In addition, you will also experience improved mileage because your engine will become more efficient in burning oxygen and fuel.
Heavy-Duty 304 Stainless Steel Construction. For high-quality and long-lasting performance, Corsa constructed this exhaust system using high-grade 304 stainless steel. The entire assembly is incredibly lightweight despite its robust construction, which means your truck’s speed and handling won’t suffer. The twin Pro-Series exhaust tips are also made from high-grade stainless steel, with a durable and sleek-looking black finish.
Brushed Satin Finish. The muffler, tailpipe, and head pipe assemblies of this exhaust system all have a brushed satin finish with a clear top coat for a slight sheen and corrosion resistance. Meanwhile, the 4-inch exhaust tips sport a glossy black finish that is stylish and virtually maintenance-free.
Simple and Direct Installation. This exhaust system is designed for an easy and direct bolt-on installation, with minimal cutting required. You can accomplish the entire process in about 1 to 2 hours using hand tools and the mounting hardware included in the package.
Backed by Corsa’s Limited Lifetime Warranty. All Corsa Performance exhaust systems are covered by their limited lifetime warranty against material and construction defects. If you have any questions regarding the coverage, claiming procedures, and other warranty-related details, you may get in touch with the manufacturer.
Application. This side exit Corsa Sport Single Exhaust System with Black Tips can be installed on the 2019-2020 5.3L Chevrolet Silverado 1500.
Fitment: 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
No questions about this product yet.Ask the First Question
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box
It is not Compatible on Silverado 1500 Limited Models, fits the New Body Models Only.