FREE 1 to 3-Day Delivery on Orders $119+ Details
Contents:
(1) Throttle Body Spacer
(4) M6x1.0x70mm Bolts
(4) M6 Flat Washers
Step 1: Begin by using an 8mm socket and disconnecting the (3) hose clamps around the intake tube.
Step 2: Using a 8mm socket, loosen the intake tube connected to the throttle body. Move intake tube away from the throttle body. Next loosen and remove the (4) throttle body bolts.
Step 3: Remove the throttle body from the intake manifold. **Note Factory throttle body bolts will not be reused.
Step 4: Using a 10mm socket, install the throttle body spacer between the intake manifold and the throttle body using the (4) M6x70mm bolts, and washers.
Step 5: Reinstall the lower intake tube to the throttle body using an 8mm socket.
Step 6: Reinstall the upper intake using a 8mm socket. Installation is now complete.