Belltech 1-3/8-Inch Front Anti-Sway Bar (99-06 2WD Silverado 1500)

Improves Driving Quality. Anti-sway bars, or anti-roll bars, are an aftermarket accessory you want your vehicle to be equipped with. The Silverado 1500 Front Anti-Sway Bar is a 1-3/8-Inch is made to reduce body roll of your vehicle at high speeds by increasing the suspension’s roll stiffness. This anti-sway bar is designed to enhance handling and steering response. This anti-sway bar increases your cornering ability so that you’ll be able to make sudden turns more easily.

High-Quality Construction. This anti-sway bar is made of cold-formed solid steel, so you can expect it to last for a long time. In addition, it’s protected by a powder-coat finish, making it resistant to corrosion. This anti-sway bar also comes with swedged ends and polyurethane bushings. The necessary mounting hardware is included.

Moderate Installation. The Silverado 1500 1-3/8-Inch Front Anti-Sway Bar is somewhat complicated to install, which is why you should stick to the manual that comes in the box. It’s also recommended you take your vehicle to a professional mechanic to install this anti-sway bar, since you will need to remove and reinstall your front wheels and do more heavy lifting.

Limited Lifetime Warranty. The Silverado 1500 1-3/8-Inch Front Anti-Sway Bar comes with a limited lifetime warranty from Belltech. This warranty protects you against defects in manufacturing and workmanship, and is non-transferable.

Application. The Silverado 1500 1-3/8-Inch Front Anti-Sway Bar is made to fit all 1999-2006 Chevrolet Silverado 1500 models.

Installation Requirements. Installing the Silverado 1500 1-3/8-Inch Front Anti-Sway Bar will take approximately 1 hour. You will need good mechanical skills and the proper tools, such as a floor jack, jack stands, and the right wrenches and sockets.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov