BDS 4-Inch Radius Arm Suspension Lift Kit with FOX 2.0 Performance Series Shocks

Heavy-Duty Suspension Lift. The BDS 4-Inch Radius Arm Suspension Lift Kit is designed to increase ride height and ground clearance while maintaining proper suspension, steering, and drivetrain geometry. The BDS 4-Inch Radius Arm Suspension Lift Kit combines heavy-duty tubular radius arms, high-strength progressive-rate front coil springs, a rear spring configuration, and FOX 2.0 Performance Series IFP Gas Shocks for a comprehensive suspension upgrade. Supporting components help correct steering, sway bar, and transfer case geometry for dependable performance at the increased ride height.

Construction and Appearance. This BDS 4-Inch Radius Arm Suspension Lift Kit features heavy-duty, precision-manufactured suspension components engineered for strength and long-lasting performance under demanding conditions. High-strength progressive-rate front coil springs and robust tubular radius arms are complemented by a forged drop pitman arm, front track bar relocation bracket, heavy-duty transmission crossmember, transfer case indexing ring, and FOX 2.0 Performance Series IFP Gas Shocks for a rugged, performance-oriented configuration.

Installation. Installation is difficult and requires extensive removal and replacement of suspension, steering, and drivetrain-related components followed by precise suspension setup and a professional wheel alignment. Drilling or additional modifications may be required depending on the vehicle configuration and installation requirements.

Application. This BDS 4-Inch Radius Arm Suspension Lift Kit fits 2019-2024 RAM 3500 4WD with 6.4L engine and Factory Overload Springs.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov