BDS 2-Inch Coil-Over Leveling Kit with Upper Control Arms, FOX 2.0 Coil-Overs and FOX 2.0 Shocks (13-18 4WD RAM 1500 w/o Air Ride, Excluding EcoDiesel)Find parts that fit my vehicle

Description. These 2" Coilover Systems are designed to build on the stout factory front suspension design on the RAM 1500 trucks and take performance to the next level while leveling out the stance.

At the heart of these 2" leveling kit are a pair of specially tuned FOX 2.0 performance race series coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation. This kit takes performance for the next level by upgrading to FOX 2.0 performance series.

Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory coil springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.

Tire & Wheel Combinations

• 33x12.50 w/20x9 and 5" back spacing
• 33x12.50 w/18x9 and 5" back spacing
• *Trimming may be required*

Application. This BDS 2-Inch Coil-Over Leveling Kit with Upper Control Arms, FOX 2.0 Coil-Overs and FOX 2.0 Shocks is designed to fit 2013-2018 4WD RAM 1500 models without Air Ride, Excluding EcoDiesel.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov