(approx) 2 Hours
Light to Moderate mechanical skill required.
Features, Description, Reviews, Q&A, Specs & Installation
Rugged Style and Protection. If your 2006-2014 F-150 sees use both on and off-road, you should replace that wimpy factory rear bumper with one that can handle the extra abuse. This Barricade Off-Road Extreme HD Rear Bumper is designed to provide excellent protection from all kinds of hazards while adding rugged styling to your F-150. This Barricade Bumper is ideal for those who don't shy away from adventure where ever it may be found.
Heavy Duty Construction. Barricade Off-Road manufactures their Rear Bumpers to precise specifications from 3mm thick steel plate for superior strength and rigidity. Barricade then completes their Bumpers in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability.
Easy, Bolt-on Installation. Barricade Off-Road Rear Bumpers were engineered to be a direct bolt-on upgrade replacement for your F-150s original stock bumper reusing the factory mounting points. There is no cutting or modifications required for a simple straight forward install. With the help of a friend and a set of basic hand tools this Barricade Bumper can be installed in about two hours.
Application. This Barricade Off-Road Extreme HD Rear Bumper is designed to fit all 2006-2014 Ford F-150 models. This Rear Bumper is designed to work with models that are equipped with or without rear mounted backup sensors.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here.
Fitment: 2006 2007 2008 2009 2010 2011 2012 2013 2014
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 02, 2020
Don’t purchase expecting quality work
I bought the barricade front bumper because mine had a scratch. It came and was in good shape minus some small paint nicks, so I ordered this barricade rear after wanting to match the look. I read the bad reviews about the parking sensor but being mechanically inclined I took the risk anyways. Install took time but wasnt difficult, the parking sensor design is horrible. All they had to do was match the barricade holes to the size of the factory ones and you could reuse the whole parking sensor assembly instead of popping the sensor out of the clips. But instead, they make a mount welded to the bumper thats not only too small (I had to dremel the raised edges on my sensor off, they include foam for it to seat (instead of just making the holes the size of the sensor if they wanted to keep their bad metal design, and the foam does not stick. They set screws the include to hold the sensors are regular machine screws and their mount holes have 0 threads so theyre worthless. To top it all off, my bumper came with a hand sized section that is bare metal and looks like it was grinded or missed completely by powder. So I called the company I have spent over 3,000 dollars with expecting a solution besides me completely undoing 3 hours of work and shipping a steel bumper back to roll the dice again, they said because of their new system in place the max they could do is offer me 45$ store credit. Extremely unsatisfied with American Trucks customer service and its a shame. If youre looking for a bumper that needs refining and possibly paint for a mediocre price, this is your bumper.Helpful (0)
December 19, 2019
Easy to install with a great look
I didn't have to run to the store and grab a socket I didn't have I would have done it in just over an hour. It was super easy to install by following the video provided on this page. I was able to do this by myself, but having help would have made it even easier.Helpful (1)
December 14, 2019
Installed the bumper today, 12/14/19, and it went well. Need 2 people to install. It is heavy with the hitch trying to line up bolts. I gave the inside of the bumper several coats of Rustoleum flat black paint and the outside several coats of Rustoleum spray on bed liner as some reviews said they had some rust show through soon after install. Used 3/4" LED lights in the sensor holes and hooked each side to brake/turn signals. Holes are a little large for the LED's so a little silicone sealer worked great. LED back up lights install well in mounting holes.Helpful (1)
December 12, 2019
Best bumper value ever!!!!
I routinely visit your website, looking at this bumper for about a year, hoping the price would become more affordable. Out of the blue, I spotted something I have never seen before. OPEN BOX appeared under the full price and listed more than $300 off the regular price. I immediately called and ordered this sharp piece of hardware. It was delivered to my home w free shipping to boot!! I was so jazzed, I paid my mechanic to install it!!!Helpful (1)
October 23, 2019
So this number is mean looking and sturdy as all get out. Install was smooth overall. The rear sensor lights were more of a paint than I expected and the slots to slide them into place are too long for the L-shaped sensors so be aware. Had to get creative. Also the screw tightening aspect to lock them in is about impossible but be patient I guess. Overall great number and super happy with it!Helpful (1)
August 01, 2019
Don’t buy if you have sensors!
Stupidest design ever! Holes are too small, then you have to hold the sensors in with a screw that you don’t have great access to...and that screw hole is too small too! I would return but it’s too late now. Use silicone I guess.Helpful (1)
June 21, 2019
You get what you pay for !
Nice look but......sensor mounts are horrible set screws dont fit ! I ended up silicone them in very poor design.Then the licence plate over laps the licence plate lights the holes for the mounts are to close another poor design. My advise is find a different bumper i endedHelpful (2)
June 13, 2019
Nice fit and bang for your buck
Nice look all steel 1 piece fast shipping and is a nice match to the DV8 3 piece front bumper.Helpful (1)
June 11, 2019
Bumper was ez to install and looks great! Will be ordering the front bumper soon!Helpful (1)
April 14, 2019
Comes as advertised, much better than the stock bumper in both appearance and function. Accommodated both trailer hitch and aftermarket dual pipes without problem.Helpful (1)
I purchased this bumper, and did not realize it came without a trailer hitch. How do I get a trailer hitch attached to this bumper? On this particular model there is no where to attach one to the frame, and the stock bumper has it welded on. Thank you for the feedback.
The Barricade Extreme HD Rear Bumper will not have provisions for a bumper mounted hitch. You will need to use a frame mounted hitch to tow with this bumper installed.
are the backup sensor hole welded from the back, how to i get the mounting bracket out so i can properly fit in some backup sensors. need to enlarge the hole to get the grommet to fit properly
When installing the OEM backup sensors into the Barricade Extreme HD Rear Bumper, the sensors should be pushed in through the back. Further details can be seen at the guide linked below: https://lib.americantrucks.com/files/T528776-manu.pdf
Hi. I also would like to order this bumper however am also concerned about the sensor holes being too small. I see on a previous question you said that there were some defective units, but other should be fine... Has anyone successfully installed the sensors into this bumper? What did you have to do?
Yes, many customers have successfully installed backup sensors following the instructions in the install guide.
Will this work on a vehicle that did not have a factory tow package?
Yes, this will work with all 2006-2014 F-150 models
what is the weight for this bumper
Shipped weight is 70 lbs.
There should not be any fitment issues with the backup sensors, defective units were few and far between.
The holes are approximately 1"
The Barricade Extreme HD Rear Bumper will work with the factory tow hitch, and will not require removal for installation.
It likely will be hard to notice, however you could just find small black rubber plugs to fill the gaps if need be.
This bumper will have a textured black finish.
This bumper does have provisions to mount LED lights in it. See Figure 9 in the install guide. https://lib.americantrucks.com/files/T528776-manu.pdf
Provided that the Reese hitch was frame mounted and not bumper mounted, you will have no fitment issues combining this bumper and your existing tow hitch.
Yes, this bumper will clear the Roush rear exit exhaust without an issue.
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box