Airaid Cold Air Dam Intake with Red SynthaFlow Oiled Filter (11-14 6.2L F-150, Excluding Raptor)

Intake Provides Superior Air Charge. Maximizing cold air flow to the high-capacity filter and the unrestricted air intake tube behind it is the goal of the Airaid Cold Air Dam Intake with SynthaFlow Oiled Filter, which shows in many of its special features. The Cold Air Dam panels create extra routes for cold air to reach the intake. At the same time, the heat shield and other parts are designed to more effectively block engine heat from reaching the filter area – including blade-style weatherstripping that clings firmly to the bottom of the hood. All this adds up to dyno-proven boosts of +12 horses and +14 ft-lbs of torque.

Simple No-Tune Operation. Adding the Airaid Cold Air Dam Intake to your 2011-2014 F-150’s 6.2L engine (non Raptor) is straightforward thanks to the fact that no aftermarket tune is needed to get it up and running. The CAI will work perfectly fine with the factory tune still in place, though it’ll also continue functioning if you later install an aftermarket performance tune.

Highly Effective Washable Filtration Element. The Airaid Cold Air Dam Intake includes a SynthaFlow Oiled Filter which is capable of capturing particles down to 2 microns in diameter reliably. The material used is a mix of non-woven synthetic and cotton gauze, with a red color. The filter is made so that you can periodically wash it and reinstall it to extend its service life greatly (though it is necessary to re-oil it after cleaning).

Light but Sturdy Design. The intake tube of the Airaid Cold Air Dam Intake is manufactured out of the same tough, lightweight high density polyethylene as the heat shield, giving the component a total weight of 12 lbs. The filter is a mix of cotton and synthetic fabrics in different layers. The color of most of the piece except the filter elemetn itself is black, with a textured surface matching other common trim pieces. The 4 clamps used in the CAI’s build are rust-defying stainless steel.

MAF Housing for Factory MAF. The Airaid Cold Air Dam Intake with SynthaFlow Oiled Filter is made with a MAF housing that accommodates the stock MAF. All necessary hose attachments and other fittings are also included in the construction.

Bolt-On Installation in Under 2 Hours. You can install the Airaid Cold Air Dam Intake in part of a morning, with a bolt-on installation time of 1.5 hours or less. The component is made to fit the pre-drilled mount holes, using the included high-grade hardware and your set of ordinary car hand tools.

Lifetime “No Hassle” Warranty. The Airaid Cold Air Dam Intake comes complete with Airaid’s “No Hassle” limited lifetime manufacture’s warranty for your peace of mind.

CARB Certified, Legal in Whole USA. Airaid’s Cold Air Dam Intake with SynthaFlow Oiled Filter is CARB exempt, with the CARB EO Number #D-609-18. This certification makes it street-legal throughout all 50 states of America. The component comes with the appropriate CARB compliance sticker, and must be mounted in such a way that this sticker is visible in order to pass inspection.

Application. This Airaid Cold Air Dam Intake with a SynthaFlow Oiled Filter is specifically designed to fit on all 2011-2014 6.2L F-150s. It is not compatible with the 6.2L Raptor.

Note: Coupon codes cannot be applied to this product.

Shop All Truck Parts And Accessories

Shop All Cold Air Intakes For Trucks

Fitment:

• 2011 Ford F-150
• 2012 Ford F-150
• 2013 Ford F-150
• 2014 Ford F-150

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov