Talk to a F-150 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Airaid Cold Air Dam Intake with Blue SynthaMax Dry Filter (07-08 4.6L F-150)

Item T102337-E
AmericanTrucks no longer carries the Airaid Cold Air Dam Intake with Blue SynthaMax Dry Filter (07-08 4.6L F-150). Please check out 1997-2003 Ford F-150 Cold Air Intakes for an updated selection.
Airaid Cold Air Dam Intake with Blue SynthaMax Dry Filter (07-08 4.6L F-150)
Verify parts fit and get product recommendations.
F-150 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Improves Airflow for Better Performance
    • Black High-Density Polyethylene Intake Tube
    • Dry - SynthaMax Filter Included - Blue
    • Filter is Washable and Reusable
    • Reuses the Factory Intake Box
    • NO Computer Re-Tune Required
    • CARB EO # D-609-18
    • Fits 2007-2008 4.6L F150s

    Description

    More Life into your Pickup. Breathe more life into your pickup with this top-end Airaid cold air dam intake. The kit is designed to bring as much cool air as possible into the engine of your truck. That means that it can operate at higher performance levels and offer greater horsepower and torque during operation. This intake is made from top quality materials and will help you drive faster, get more done and access power when you need it. The intake is one of the simplest ways to get more power out your your Ford's engine.

    No Tuning. Tuning isn't necessary when using this Airaid cold air dam intake kit. That's one way that it's highly convenient to make use of. When you rely on this set you can install it immediately and start getting more power. If you do decide to tune in the future, it works with a tuned truck as well. You could get even more performance through tuning, but you aren't required to do it like you are with some intakes.

    A Reliable Long Term Filter. This intake uses SynthaMax air filters to clean up the air running to the engine. The filter is made from top quality materials and designed to capture the smallest particles during operation. It's made with oil soaked cotton on the outside layer, and a synthetic material that captures objects down to 2 microns in size in the inner layer. The result is a highly effective filter. It's washable and you can easily use it again and again.

    Solid Built. This Airaid cold air dam intake is made from polyethylene. That's a tough plastic that's designed to hold up to hard use over time. It will stand up to abrasion, heat, grease and chemicals capably over time.

    Fast Install. This Airaid cold air dam intake takes no time at all to install. When done by a professional it goes in in just a single hour. If you're in a hurry to improve your truck you can leverage the intake to get more power nearly instantly after purchasing it.

    Extended Protection. Airaid offers a Limited Lifetime warranty on this intake kit. That means that you are protected for the whole time you use the intake and you can count on it performing over the long term.

    Accepted Everywhere. One of the best features of this Airaid cold air dam intake system is that it works in all 50 states. It's legal everywhere thanks to complete CARB approval, which makes it easy to use where you like.

    Application. This Airaid Cold Air Dam Intake with the SynthaMax Dry Blue Filter is specifically designed to fit on the 2007 to 2008 F-150s powered by the 4.6L V8 engine

    Note: Coupon codes cannot be applied to this product.

    Shop All Truck Parts And Accessories

    Shop All Cold Air Intakes For Trucks

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Premium Filter
    • (1) MAF Panel
    • (1) Bottom Panel
    • (1) Intake Tube
    • (1) Filter Adapter
    • (1) Urethane Hump Hose
    • (1) Reducer Coupler
    • (1) 24-3/4" Weather Strip
    • (7) 6-32 x 5/16" Screws
    • (7) #6 Flat Washers
    • (7) 6-32 Keps Nut
    • (5) 1/4-20 x 7/8" Bolts
    • (12) 1/4" Flat Washers
    • (3) Bushings
    • (5) 1/4-20 Lock Nuts
    • (1) 4-1/2" Gasket
    • (2) Rubber Grommets
    • (1) M6- 1x25 Hex Bolt
    • (1) Long/Narrow Bracket
    • (1) Hose Mount
    • (1) Aluminum Fitting
    • (1) #48 Hose Clamp
    • (1) #52 Hose Clamp
    • (2) #80 Hose Clamps
    • (1) M6x1x20 Button Head Bolt

    Tech Specs

    Cold Air Intake Specifications
    Year/Model:2007-2008 4.6LFilter Placement:Engine Bay
    Material:High-Density PolyethyleneFinish:Black
    Manufacture:AiraidComputer Tune Required:No
    4.5

    Customer Reviews (31)

      Questions & Answers

      10 More Questions

          Related F-150 Categories