- (1) Air Filter
- (1) Seal/ Trim - 15.5"
- (1) Fitting, Air Temp Sensor
- (1) Tube
- (1) Housing
- (1) Coupling, Silicone Reducer
- (1) Coupling, Silicone Hump
- (4) Clamps
- (2) Retainer Clip
- (1) Grommet
Free Shipping On Orders Over $75. Details
$422.75 (kit)FREE Shipping
The Rhino-Rack Vortex 2500 RS 2 bar roof rack in black is available for any 2015 or newer F-150 owner who's looking to maximize their cargo space by adding some storage capabilities to the roof with a rack that's capable for light off-road usage. This has a few different benefits, and is compatible with most accessories. And the installation isn't gonna require you to drill or cut into your truck. So expect one out of three wrenches on our difficulty meter, which I'll talk about later on in the video. You should absolutely be checking out this roof rack if you're using your F-150 to do a lot of off-road or cross-country adventures that require a lot of hauling. Basically, that can include camping, skiing, biking, kayaking, or other water sports which require the use of bigger racks and brackets. This way you can free up some room in the bed for other things like luggage, fishing gear, or whatever else you might need to haul. And you won't have to use the back seats for storage, which often take up and make it inconvenient for your passengers who need some space in the back there. The design of this rack was specifically done to make sure that the wind noise, drag, and rattling are not a factor. Everything was built to connect and tightly seal so there's no wiggle room which would ultimately become pretty annoying. Some of the other tubular designs don't sit flush like this, so it can be problematic. Now, they're called, "vortex bars," for a reason. They're engineered to reduce wind drag while providing the most support possible extending the width of your truck. Each set has a 165-pound load rating. Which is pretty decent considering the average kayak weighs about 50 pounds, and the average bike weighs about 15 to 20 pounds. They have glass reinforced nylon legs for strength. And each kit includes two crossbars and mounting legs. They bolt right onto your roof without modifications. And they can be easily removed if you ever wanna go back to the stock look, or they're not in use. They even offer a locking cap on each bar to prevent them from getting stolen. Which adds a ton of value in my personal opinion. Rhino-Rack offers a few different variations of the Vortex Roof Rack. There isn't anything too different between the few different ones they do offer. But the RS version I have here, I think, it's a bit more aerodynamic. Since it sits lower and it doesn't have extending sides like the non-RS version. But they're all doing same job with the same weight rating. so it does come down to personal preference. They're also offered in silver, if the black one isn't really doing it for you. And you could pick the one I have up here for just about 400 bucks. This is gonna be one of the more expensive options since it does have the wind reducing quality that most options do not account for. And they accept most accessories, as I mentioned earlier. The installation again is a direct bolt-on. No modification or drilling needed to get the job done which you can tackle in about 15 to 20 minutes or so in your driveway. This just goes to show how easily they can be mounted and removed whenever you need them to be. The only tool you'll need is the Security Allen Key provided for you in the kit. Although, I would recommend having measuring tape on deck to help evenly distribute the racks in your roof for proper installation. This one definitely gets one out of three wrenches on our difficulty meter. The first thing you wanna to do is use the key provided in the kit to unlock the caps on the cross bar legs. Clip the rubber pad to the foot plate with the left arrow facing out. There are labels in the kit to help you later identify which is the rear right and left legs, and the front right and left. So you can place those inside the crossbars after removing the caps. Put the cross bars into position on your roof and measure the proper distance from the section between the front and rear doors. And then the distance between the cross bars from the center of the foot plate on each bar. The directions will help with this a lot if you're not understanding what I'm explaining. Because I know it can be a bit confusing. Attach the metal clamp to the foot and then screw the bolt into the pivot nut. And then attach the other end to the door jam and fasten them down. Make sure you evenly distribute the tension on each side so they're not pulling in one direction more so than the other. The torque specs are laid out in the manual as well. Re-attach the foot plate and lock them down, and you're good to go. Well, that just about wraps this one up. So if you're the owner of a 2015 of newer F-150, you might wanna check out the Rhino-Rack 2500 Vortex RS roof rack in black which you can find right here on americantrucks.com.
Fitment: 2015 2016 Details
Installation Time: (approx) 1 Hour
Difficulty Level:Simple installation for anyone
Will installing this void any of my warranty like powertarin for example? Would I need to put back the stock when I take it in for my maintance at the dealership?
The AFE Momentum GT Pro 5R Cold Air Intake should not void your warranty, however we do recommend returning to stock for trips to the dealership to avoid any hassle from the dealer.
I JUST WANTED TO KNOW IS THIS LEGAL IN CALIFORNIAAND HAVE A CARB #
The AFE Momentum GT Pro 5R Cold Air Intake is not currently have a C.A.R.B Compliance number and would not be legal for vehicles traveling on public roadways in the state of California & other states that have adopted C.A.R.B's emissions standards.
Does filter require periodic re-oiling?
The AFE Momentum GT Pro 5R Cold Air Intake comes with an oiled filter that will require regular cleaning and re oiling.
I bought bigger tires for my 2016 F150 2.7L Ecoboost, and I noticed that it requires a little more power to rotate the bigger tires; in addition, I lost about 3 mpg because of the bigger tires. I would like to purchase a CAI that will at least give me back what I've lost and more if possible. What CAI do you recommend for what I am looking for? I drive a combination of city and highway. Road conditions are not muddy, dusty whatsoever. It does, however, get extremely hot in Houston, TX. I don't tow or haul either, but If I do, It will be minor items. Please let me know. Thanks.
The AFE Momentum GT Pro 5R Cold Air Intake will add more power and can help with MPG slightly. if you also tune you can see better results in best area.
Does this CAI require a tune?
This cold air intake does not require a tune however for the maximum performance, I would strongly recommend re-tuning after installing this item.
Installation Time:Less than 1 Hour
Installation Time: Less than 1 Hour
June 22, 2017
Review from AFE Momentum GT Pro 5R Cold Air Intake - Black (15-17 2.7L EcoBoost F-150)
You can really feel it easy to install 15 to 20 Mins make sure you have it on all the way before you tighten it down.
Performance Gain 5
Installation Time: Less than 1 Hour
November 06, 2016
Its all around an amazing intake and i like that it has a kind of closed box design and keeps heat from hitting the filter.
Performance Gain 4