Synergy Manufacturing Heavy Duty Tie Rod (14-25 4WD RAM 2500)

Description
Ram Heavy Duty Tie Rod. All new design and components specific to the new radius arm Ram Truck platform. Direct bolt-in replacement for the stock tie rod for an immediate upgrade in steering feel and strength. No wheel size requirements! Can be installed on a stock Ram with stock wheels and tires. Tie rod is made from heat treated chromoly for maximum strength. Low misalignment dust boots eliminate tie rod flop. You will not find a better tie rod on the market!
Fitments:
2014+ Ram 2500 / 3500 4x4

Benefits:
Improves strength and steering feel and eliminates any chance of bending.
Offers a more direct connection to the road compared to stock; no more bent tie rods and constantly having to align your vehicle.
Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock and include grease fittings/replaceable dust boots for ease of maintenance.
Eliminates unwanted tie rod flop and the steering dead-spot commonly encountered with hydro assist setups.
Tie rod length adjustable on the vehicle.
Compatible with stock wheels and tires.

Features:
Over 40% stronger than the stock tie rod.
Tie Rod bolts right into the factory mounts with no additional wheel requirements.
No factory tie rod components need to be reused.
Includes Synergy HD Metal on Metal Tie Rod Ends with oversized 1 1/4 inch shank.
Low Misalignment tie rod end boots are used to prevent unwanted tie rod flop. Eliminates the steering dead spot commonly associated with hydro assist setups.
Tie Rod is CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming.
Abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
Both ends of the bar use pinch bolts instead of jam nuts to simplify installation and adjustment.
Tie Rod has an outer diameter (OD) of 1.75 inches and must be used with our steering stabilizer clamp.
100% bolt-on components assures an easy, trouble free installation with the use of basic hand tools.

Min/Max Length:
Measured in a straight line from center of tie rod end to center of tie rod end
Min collapsed length: 60.00"
Max extended length: 62.75"
Includes:
(1) 8702-11 Ram tie rod
(1) Adjuster sleeve
(2) Pinch Bolts and hardware

Notes:
Replacement Tie Rod Ends:
Driver side: 4168-L
Passenger side: 4138-L
Recommended Fox Steering Stabilizers:
IFP - Internal Floating Piston - 6401-01
TS - Through Shaft - 6402-11
ATS - Adjustable Through Shaft - 6403-11
Synergy High Performance Grease part number 4119 recommended to be used with all Tie Rod Ends
Synergy Premium Copper Infused Anti-Seize part number 4118 to be used with all threaded components (TRE's and Adjuster Sleeve)
Steering Stabilizer Clamp part number 4050-75 required to retain steering stabilizer
Supersedes part number 8702-01

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov