Talk to a Sierra 1500 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$12k Summer Sweepstakes! Enter Daily>

Best Sellers

How to Install Putco 48 in. Tailgate LED Light Bar on your Sierra

KIT CONTENTS


LED TAILGATE LIGHT BAR WIRING AND INSTALLATION

1. Pre‐installation preparation.

Verify the kit contents (check against parts listing). Remove any protective wrapping from the light strips or bolt kit.

2. Attach LED tailgate light bar to vehicle.

Secure the light bar to the vehicle with either the included screws (may require drilling) or the double‐sided tape.

Make sure LED light is installed in the direction as below photo with wire harness in right side. Otherwise, the turning signal will enable in wrong direction.


3. For Vehicles with a hitch/towing Package:

Plug LED tailgate light bar into hitch receptor.

The LED light bar is equipped with a 4-way plug. This plug installs into the existing plug on your truck's towing package. Insert the strip light 4-way plug into the matching receptor on your truck and wiring is compplete.


To enable white backup lights you must splice the separate white wire into your vehicle's existing reverse light. Be sure to cover the splice with electrical tape or other electric product.

4. For vehicles without a hitch/towing package:
Wire LED tailgate light bar into electrical system.

Use the included color‐coded wiring harness and splice each wire to the appropriate wire on your vehicle’s tail lamps. Be sure to


To enable white backup lights you must splice the separate white wire into your vehicle's existing reverse light. Be sure to cover the splice with electrical tape or other electric product.


Best Sellers