Talk to a Ranger Sales Tech
1-610-990-4561
M-F 8:30A-11P ET, Sat-Sun 8:30A-9P ET
$3K Fall Sweepstakes! Enter Now >

Find 3 Inch to 5 Inch Lift Kits for your Ranger

ICON Vehicle Dynamics 0 to 3.50-Inch Suspension Lift System with Tubular Upper Control Arms; Stage 3 (19-21 Ranger w/ Factory Aluminum Knuckles)Find parts that fit my vehicle

Item FR26074
AmericanTrucks no longer carries the ICON Vehicle Dynamics 0 to 3.50-Inch Suspension Lift System with Tubular Upper Control Arms; Stage 3 (19-21 Ranger w/ Factory Aluminum Knuckles). Please check out 2019-2023 Ford Ranger Lift Kits for an updated selection.
$0.00
Want $10? Write one of the first 5 reviews 4.7 ICON Vehicle Dynamics Suspension product ratings

    Product Information

    Features, Description, Q&A, Specs & Installation

    Features

    • Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
    • FK Rod End bearings provide extended longevity and minimal deflection
    • Shocks are fully rebuildable and revalvable
    • ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
    • Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
    • Height-adjustable coilovers provide a range of 0-3.5” of front lift height
    • Fits 2WD & 4WD applications
    • Increased lift height allows for fitment of larger and more aggressive tires
    • 35% increase in front wheel travel over stock
    • ICON shocks feature vehicle specific tune for superior performance and ride quality
    • Corrosion resistant anodized shock body with remote reservoir and 5/8" shaft (2.0 Aluminum Series shocks)
    • Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
    • Direct bolt-in design makes for a simple and straightforward installation
    • Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect

    Description

    ICON Vehicle Dynamics 2019-2021 Ford Ranger suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the new Ranger platform’s suspension and addressed any areas where performance could be extracted. The Stage 3 (Tubular) system includes vehicle-specific tuned, extended travel 2.5 Series coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” allowing the use of larger, more aggressive wheel and tire combinations. The included ICON tubular upper control arm kit is designed to improve the overall performance with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the ICON Delta Joint allows for full bump and extended droop travel of the front suspension while eliminating bind. ICON 2.0 Aluminum Series monotube remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear while the included foam bump stop kit increases rear end compliance.. The ICON Vehicle Dynamics 2019-2021 Ford Ranger Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Tech Specs

    4.7

    Reviews of ICON Vehicle Dynamics Suspension Products (33)

    Questions & Answers

    No questions about this product yet. Ask the First Question

      Most Popular from SuperLift