FREE 1 to 3-Day Delivery on Orders $119+ Details
Materials List: Contractors Rack (Con-Rack), (4) Nut and Bolt Sets, (2) Contractors Rack Feet,
* To install without a toolbox, you will need at least 3/8th inch nut and bolt sets.
Step #1
The Con-Rack feet may be positioned on the inside or outside of the support legs on the Con-Rack. The width of the truck bed will determine the foot position.
Step #2
* Your J-Mac Con-Rack is designed to align with the front edge of the truck’s bed rails. Note that some bed rail caps do not run all the way to the front edge of the bed rail, such as the factory bed rail caps on the 97-99 model Ford F-150. In these cases, it will be necessary to move the Con-Rack past the bed rail cap and align it with the front edge of the bed rail.
Step #3
This Con-Rack is designed with 24 inch or 36 inch feet (optional). The two different lengths are provided to accommodate different widths of toolboxes. Before any holes are drilled check the clearence and accessibility of the fasteners.
Installation with toolbox:
Installation without toolbox: