FREE 1 to 3-Day Delivery on Orders $119+ Details
Best Sellers
How to Install Husky 3.5 in. Wide Mud Grabbers (07-18 Sierra 1500) on your GMC Sierra
Installation Time
1 hours
Tools Required
- Power Drill with 1/8” drill bit
- Hex Head Drill Attachment
Shop Parts in this Guide
RECOMMENDED INSTALLATION TOOLS :
• Power Drill with 1/8” drill bit
• Hex Head Drill Attachment
VEHICLE PREPARATION:
Your vehicle’s fender mounting area should be cleaned prior to the installation of your
new Husky Long John Flares.
Installation
Read all directions thoroughly prior to the installation of your Mud Grabber Flare.
1. Clean the mounting location on your vehicles fender.
2. Align the Mud Grabber mounting flange under the fender lip and press the upper lip against the outside of the fender for easy alignment.
Note: These are general mounting guidelines and the flares can be mounted in many different ways to provide whatever coverage you deem necessary.
3. Use supplied self drilling screws and washers to fasten the Mud Grabber through the flare’s flange and into the fender lip.
4. Repeat steps 1-3 on the opposite side.
